Announcement

Collapse
No announcement yet.

Syncrowave 200-no tig

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Syncrowave 200-no tig

    i currently have a syncrowave 200. Don't really know what happened just one day it wouldn't start the tig arc. It stick welds fine. Tried a new foot remote an still nothing... no arc or gas flow. Shops around are so dang expensive. Looking for a place to get a new board maybe? Any hints or thoughts appreciated!

  • #2
    Bump
    Nick
    Miller 252 Mig
    Miller Cricket XL
    Millermatic 150 Mig
    Miller Syncrowave 200 Tig
    2-O/A outfits
    Jet Lathe and Mill
    Jet 7x12 horz/vert band saw
    DeWalt Multi Cutter metal saw
    Century 50 Amp Plasma Cutter
    20 ton electric/hydraulic vertical press
    Propane Forge
    60" X 60" router/plasma table

    www.youtube.com/watch?v=jTu7wicVCmQ
    Vist my site: www.nixstuff.com
    and check out some of my ironwork and other stuff

    Comment


    • #3
      Can you post your machine settings while in tig mode please?

      Did you try both AC and DC polarity in tig mode?

      Comment


      • #4
        zachary

        Yes i tried all polarities. still nothing

        Comment


        • #5
          Serial#, and what does the machine do when you paper clip (jumper) "A" to "B" on the 14 pin machine amphenol,

          Comment

          Working...
          X