Announcement

Collapse
No announcement yet.

Flux core spatter

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    tweak ur settings a little bit. ie. up the voltage a bit or knock the wire down a little to keep the spatter down. 9 times out of ten you will find a roll of dual shield on the wire feeder rather than gas-less flux.
    trail blazer 302
    hypertherm plasma
    millermatic 251
    high feq. arc starter
    suit case (extreme 12vs)
    o/a torches
    way to many other tools to list

    Comment


    • #17
      Originally posted by Daniel View Post
      Why do you use .045, is it thin material? I use 1/16 most of the time. I find little use with 045 if the material is 1/2 or thicker.
      My tanks i weld are 3/16" and up. I use a MM252 but the other guys are running Miller 300's and they use 1/16" wire...Bob
      Attached Files
      Bob Wright

      Spool Gun conversion. How To Do It. Below.
      http://www.millerwelds.com/resources...php?albumid=48

      Comment

      Working...
      X