Announcement

Collapse
No announcement yet.

Accessary for my CNC router

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Accessary for my CNC router

    Name:  374631a3d75dbaaa36d84d5e973622ce.jpg
Views: 1
Size:  37.6 KBName:  d9e582b57c350697ee2d530d9426b8a6.jpg
Views: 1
Size:  30.3 KB

    I built a CNC router a few years back. It is fine for large projects but does not have the precision of a regular mill. I have a mill but it is not cnc. At times I need to do small project like engraving etc and I need to be within a few thou. So I made this small table to put on the bed to hold small parts . It has four screws, one at each corner to adjust it to the same plane as the router travel. The holes are all tapped to hold various shapes.
    Nick
    Miller 252 Mig
    Miller Cricket XL
    Millermatic 150 Mig
    Miller Syncrowave 200 Tig
    2-O/A outfits
    Jet Lathe and Mill
    Jet 7x12 horz/vert band saw
    DeWalt Multi Cutter metal saw
    Century 50 Amp Plasma Cutter
    20 ton electric/hydraulic vertical press
    Propane Forge
    60" X 60" router/plasma table

    www.youtube.com/watch?v=jTu7wicVCmQ
    Vist my site: www.nixstuff.com
    and check out some of my ironwork and other stuff
Working...
X