If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Congrats. on your purchase, you will not be disappointed. I also have that unit and am very plesed with it. When it comes to tig cleanliness is key! Clean material to be welded exceptionaly well or you will spend more time sharpening tungsten than welding.
Do some research here, read some threads there is alot of good info. here and alot of knowledge as well. Grab yourself some scrap metal and throw the hood down and do it. You will see certain things as you go and learn from that along with the above stated. Good Luck and welcome to the site!