Announcement

Collapse
No announcement yet.

Tig Newbie

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tig Newbie

    Just received my Diversion 180...never tigged before...very excited to learn the process...all tips and tricks very welcome....thanks for all ahead of time

  • #2
    Congrats. on your purchase, you will not be disappointed. I also have that unit and am very plesed with it. When it comes to tig cleanliness is key! Clean material to be welded exceptionaly well or you will spend more time sharpening tungsten than welding.
    Do some research here, read some threads there is alot of good info. here and alot of knowledge as well. Grab yourself some scrap metal and throw the hood down and do it. You will see certain things as you go and learn from that along with the above stated. Good Luck and welcome to the site!

    Comment


    • #3
      Go to the site: weldingtipsandtricks.com
      Watch all the tig videos and read all his tig related info. You will pick up a lot.

      Goid luck
      sigpic

      Dynasty 200 DX
      Millermatic 350P
      30A Spoolgun
      Lincoln Pro Mig 140
      Hypertherm Powermax 30
      14" Rage Evolution dry saw
      40 ton press brake
      Evenheat Heat treat oven

      1x42 / 4x48 belt grinder

      Comment


      • #4
        Try the site weldingtipsandtricks.com. Watch all the tig videos and read all the tig material. You will pick up a lot.

        Good luck
        sigpic

        Dynasty 200 DX
        Millermatic 350P
        30A Spoolgun
        Lincoln Pro Mig 140
        Hypertherm Powermax 30
        14" Rage Evolution dry saw
        40 ton press brake
        Evenheat Heat treat oven

        1x42 / 4x48 belt grinder

        Comment


        • #5
          Try the website, weldingtipsandtricks.com. Watch all the videos about tig and read all the info on tig welding. There is some good info there.

          Good luck
          sigpic

          Dynasty 200 DX
          Millermatic 350P
          30A Spoolgun
          Lincoln Pro Mig 140
          Hypertherm Powermax 30
          14" Rage Evolution dry saw
          40 ton press brake
          Evenheat Heat treat oven

          1x42 / 4x48 belt grinder

          Comment

          Working...
          X