Announcement

Collapse
No announcement yet.

304 cc/cv welder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 304 cc/cv welder

    gentlemen, a little help please. have a 304 cc/cv miller that started showing help 5, machine welds fine, shows help 5, shuts down. fan does not come on before or after shutdown. s/n lb075651. took covers off to check for excessive dirt, etc.-looked pretty normal (blew it out anyway). reassembled, no change in function. suggestions? thank you.

  • #2
    Well change your fan out, takes 15 minutes once you have a new one in your hands

    Comment


    • #3
      xmt

      Originally posted by cruizer View Post
      Well change your fan out, takes 15 minutes once you have a new one in your hands
      thanks cruiser, will test feed to fan motor to see if its getting power. what voltage should i expect to see at the fan motor? thanks.

      Comment


      • #4
        24vDC

        Comment


        • #5
          Originally posted by cruizer View Post
          24vDC
          thank you

          Comment

          Working...
          X