Announcement

Collapse
No announcement yet.

Cruizer question about lincoln 255 mig welder.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cruizer question about lincoln 255 mig welder.

    Cruizer,

    Figured you would know this. Just bought a lincoln 255 mig welder , it is a 2003 model. The unit states it has fan on demand, but the moment an arc is struck the cooling fan comes on. Is this normal for the 255. I have not let the machine sit with the fan running for any length of time to see if it turnd off. It turns on the fan regardless of voltage setting, and shuting the machine off then on turns the fan off. Seems to me it has a bad thermostat?
    Thanks
    Kevin
    Lincoln ranger 305g x2
    Ln25
    Miller spectrum 625
    Miller 30a spoolgun
    Wc115a
    Lincoln 210mp
    F550 imt service truck

  • #2
    Cruizer question about lincoln 255 mig welder.

    The lincoln comes on when an arc is struck and then is on a timer after the arc is extinguished

    Comment


    • #3
      Yes, manisoba is correct. Common to most Lincoln machines

      Comment


      • #4
        thanks!

        Cruizer,
        Thanks for the info! Will be putting it to use tomorrowl
        Lincoln ranger 305g x2
        Ln25
        Miller spectrum 625
        Miller 30a spoolgun
        Wc115a
        Lincoln 210mp
        F550 imt service truck

        Comment

        Working...
        X