Announcement

Collapse
No announcement yet.

quick connect ground on a Miller 211 ideas?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • quick connect ground on a Miller 211 ideas?

    I'm wanting to put a quick connection on my welder. Why because I'm always on the move. And its always in the way when it comes to storage. I like the ones found on thermalarcs or on the new multimatic 200. Any ideas. Advice. I'm eventually going to do it. But I am having trouble getting the female end with a sleeve to bolt on the front of my welder. If you know where I can locate one foward me the info.
    .
    Miller Bobcat 225NT onan
    Millermatic 211
    Spoolmate 100
    (Retapped to fit regular mig tips)
    Work better & less parts to stock.
    Miller 130xp
    T/A Dragster 85 (portability 11 pounds)
    Oxygen/Acetylene torch set 50'
    2. 4-1/2" grinders
    1. 9" grinder
    14" Makita chop saw
    1/2" Aircat impact gun 900#

  • #2
    I would just order a male and female dinse connector.

    It wouldn't be bolted to the machine, but your ground cable will just be 12" long when disconnected. If you really wanted it machine mounted, you can buy the machine dinse connector from your local welding supplier. It is a specialty item that usually only repair shops order.

    Comment


    • #3
      quick connect ground on a Miller 211 ideas?

      Agree
      Never Satisfied

      Millermatic 211
      Maxstar 150STL
      Metabos
      Kennedy Maintenance Pro Full
      Makita Cordless 18v Li-Ion
      Stihl TS 420

      Timfrank88@live.com

      Comment


      • #4
        I did think of leaving a pigtail for the ground. But I think Itll look better if I had a dins type flush. But where would I get the housing? I've ask my local dealer. He couldn't help. Bull****. I think.
        .
        Miller Bobcat 225NT onan
        Millermatic 211
        Spoolmate 100
        (Retapped to fit regular mig tips)
        Work better & less parts to stock.
        Miller 130xp
        T/A Dragster 85 (portability 11 pounds)
        Oxygen/Acetylene torch set 50'
        2. 4-1/2" grinders
        1. 9" grinder
        14" Makita chop saw
        1/2" Aircat impact gun 900#

        Comment


        • #5
          Go look at the welders online on the miller site. Look up the part number for the one you like by finding it i the downloadable manual, then go to the Miller4less.com site and order it.

          Comment


          • #6
            Ok I'll give it a try
            .
            Miller Bobcat 225NT onan
            Millermatic 211
            Spoolmate 100
            (Retapped to fit regular mig tips)
            Work better & less parts to stock.
            Miller 130xp
            T/A Dragster 85 (portability 11 pounds)
            Oxygen/Acetylene torch set 50'
            2. 4-1/2" grinders
            1. 9" grinder
            14" Makita chop saw
            1/2" Aircat impact gun 900#

            Comment


            • #7
              Originally posted by eecervantes83 View Post
              I did think of leaving a pigtail for the ground. But I think Itll look better if I had a dins type flush. But where would I get the housing? I've ask my local dealer. He couldn't help. Bull****. I think.
              Is this what you need?

              http://www.arc-zone.com/index.php?ma...649ltel56jf6b5
              Ed Conley
              http://www.screamingbroccoli.net/
              MM252
              MM211
              Passport Plus w/Spool Gun
              TA185
              Miller 125c Plasma 120v
              O/A set
              SO 2020 Bender
              You can call me Bacchus

              Comment


              • #8
                Slightly off-topic, but not really...

                Is there any power unit that has a receptacle for a spool gun ONLY, sized for a Spoolmate100? IOW: I want to buy a "replacement" receptacle withOUT a drive motor, but WITH gas feed O-rings, but I don't know what machine to look up a PN for, or if it even exists.
                Walk softly & carry a BIG SIX ! ! !
                MM211 + SM100

                Comment


                • #9
                  Originally posted by Broccoli1:299029
                  Originally posted by eecervantes83 View Post
                  I did think of leaving a pigtail for the ground. But I think Itll look better if I had a dins type flush. But where would I get the housing? I've ask my local dealer. He couldn't help. Bull****. I think.
                  Is this what you need?

                  http://www.arc-zone.com/index.php?ma...649ltel56jf6b5
                  Looks right thanks
                  I'll put in a order
                  .
                  Miller Bobcat 225NT onan
                  Millermatic 211
                  Spoolmate 100
                  (Retapped to fit regular mig tips)
                  Work better & less parts to stock.
                  Miller 130xp
                  T/A Dragster 85 (portability 11 pounds)
                  Oxygen/Acetylene torch set 50'
                  2. 4-1/2" grinders
                  1. 9" grinder
                  14" Makita chop saw
                  1/2" Aircat impact gun 900#

                  Comment

                  Working...
                  X