Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.


Announcement Module
No announcement yet.

New to welding

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • New to welding

    Whats up guys, i just picked up my first welder. I got a miller 140 to start. I was always fascinated by welding and making it look nice haha. I got this welding to learn mig with. i am pumped and figured no better way to learn the basic then here. Just have to go find myself a 75/25 cylinder and get started.

  • #2
    Sounds like you are headed in the right direction. Keep practicing and it will come together. Just remember to search the forum first with any questions you have, there has been hundreds of great conversations over the years. This is a great place to start yourself on the right foot.
    Last edited by Cgotto6; 01-02-2013, 08:28 PM.


    • #3
      difference in books

      Good to ask a lot of questions even if you have to start new threads.
      A lot of the senior members are a big help.
      Some people will give you a hard time for starting new threads,
      but when they are rude it's best just to ignore them.
      Ask away -
      That is what the forums are for -
      to get into other members heads.

      Few good books are a help.
      Some of them get very technical and can be a bit overwhelming,
      others are better suited to a beginner and let you see a way forward with a 140 mig.
      Welding Basics [Paperback]
      Karen Ruth (Author)

      Good luck.
      Last edited by Stu Miles; 01-02-2013, 01:45 PM.


      • #4
        Getting a welder and a tank isn't the best way to learn to weld. You can learn wrong that way. I say that because you don't really know what is a good weld/bad weld yet.

        Youtube some videos from and visit their website, you will learn what is good and what isn't. Once you learn the difference between a good and bad weld, you can start teaching yourself correctly.

        Welding is fun, enjoyable, and the only way to make that custom steel bumper, but it can be a hassle to remember where it fell off at, since the welds were not done correctly.
        Last edited by Country Metals; 01-02-2013, 01:45 PM.


        • #5
          Yea I've been watching tons of YouTube.


          Special Offers: See the latest Miller deals and promotions.