Announcement

Collapse
No announcement yet.

Affordable Tungsten grinder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Affordable Tungsten grinder

    Beginner Tig welder,

    Went looking for a grinder that would quickly grind a repeatable profile for the electrode, and would not cost an arm or leg. I read most ideas and there were some good ones. Below is what I came up with for myself. I found a tool, at of all places HF that is fairly stout and looks to be up to the job. The tool is sold as a circular saw blade sharpener, 50 beens.

    With some modifications and reverse engineering I think this is going to give me what I need. If you like it and want more information although it is pretty straight forward. I will be glad to pass along what I know.



    This is the grinder completed
    Click image for larger version

Name:	DSCN2573.jpg
Views:	1
Size:	70.3 KB
ID:	531963



    This shows a post that positions the electrode
    Click image for larger version

Name:	DSCN2572.jpg
Views:	1
Size:	70.2 KB
ID:	531964

    Here is a line scribed in the base to verify the electrode length
    Click image for larger version

Name:	DSCN2576.jpg
Views:	1
Size:	45.1 KB
ID:	531965
    Greg

  • #2
    I bought one of these a few years back but yours looks different. I did a report here on sharpening blades as well as tungstens. Search "saw blade sharpener" if you want.
    Nick
    Miller 252 Mig
    Miller Cricket XL
    Millermatic 150 Mig
    Miller Syncrowave 200 Tig
    2-O/A outfits
    Jet Lathe and Mill
    Jet 7x12 horz/vert band saw
    DeWalt Multi Cutter metal saw
    Century 50 Amp Plasma Cutter
    20 ton electric/hydraulic vertical press
    Propane Forge
    60" X 60" router/plasma table

    www.youtube.com/watch?v=jTu7wicVCmQ
    Vist my site: www.nixstuff.com
    and check out some of my ironwork and other stuff

    Comment

    Working...
    X