Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Can I hookk up 6038LR wire feeder to

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can I hookk up 6038LR wire feeder to

    Name:  e04dceea35c47bbe9236a81040fe4cf2.jpg
Views: 1
Size:  46.6 KB
    this machine costs $1200

    I'm wondering if I can cobble up something similar for half the cost?

    the feed pen costs $125
    http://www.arc-zone.com/index.php?ma...oducts_id=7904

    Looks like the feed pen has a cigarette 12v power supply and some sort of data cable to feed the spool wire.

    are there any miller wire feeders that would work with this feed pen? if not are there any that could be modified relatively easily?

    I saw this wire feeder on ebay, but a search on it here yielded no results
    http://www.ebay.com/itm/MILLER-ELECT...item2ec4bc46ff
    Name:  67003d38aa5b69c8c04fdaefacb3aa79.jpg
Views: 1
Size:  49.0 KB

    i have only tig welded so I am unfamilar with mig gear. will be used to weld 16gauge aluminum with Lincoln PT-275 machine.

    just looking to speed up production.

  • #2
    electrical schematic

    Name:  86ffeb005ee8576437da43b7c83ce4f7.jpg
Views: 1
Size:  36.1 KB
    Name:  c08081eb5bf41215c10fb075e5fe848c.jpg
Views: 1
Size:  32.0 KB

    here is electrical schematic. the data connection is a r2 plug. any help is appreciated

    you can download the entire user manual here:
    http://profaxlenco.com/images/Manual/Manuals/07200.pdf

    Comment


    • #3
      Feeding Aluminum

      Is your goal to mig weld aluminum or to tig it? The Miller feeder in your post is the control mechanism for an S60M feeder meant to feed wire in the mig process. The Profax feeder is very slow speed meant to feed wire into a tig puddle. If it is tig welding you are after, there are several used cold wire feeders out there for half the amount you mentioned. weldersales

      Comment


      • #4
        please tell me manufactuer and model # of these used tig feeders for less than $600

        "there are several used cold wire feeders out there for half the amount you mentioned"

        OK you've got my attention, what are the names of these used cold tig feeders that are less than $600??? i searhced the forum, web and ebay with no luck.

        Comment

        Working...
        X
        Special Offers: See the latest Miller deals and promotions.