Announcement

Collapse
No announcement yet.

Dialarc HF remote contactor not working.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dialarc HF remote contactor not working.

    Went to do some tig welding on a pocket knife for a neighbor. Remote contactor worked one time and quit Checked the plug on the pedal and it is working . Any suggestions ? I am pretty sure its a 1977 model .
    Last edited by jmz; 12-19-2012, 07:18 PM. Reason: add info

  • #2
    No Serial#, no can help......

    Comment


    • #3
      Hh012516

      Comment


      • #4
        If the microswitch in the pedal is ok, you likely have a stuck CR3 relay in the machine. There are 3 relays, CR3 is the one furthest away from the square bridge. Give it a tap with a screw driver end, or replace it.

        Comment


        • #5
          Thanks. I will check it out.

          Comment


          • #6
            I tried tapping on the relay while stepping on the pedal and it still did not want to close on its own. I found a new relay on ebay and bought it. Looks like they are hard to come by. ????

            Comment


            • #7
              Thank You cruizer $25.00 fix

              Comment

              Working...
              X