No announcement yet.

Spectrum 875

  • Filter
  • Time
  • Show
Clear All
new posts

  • Spectrum 875

    Can it turn down enough to cut real thin stuff? I'm talking 1/8" or 22 ga. I'm sure the cut quality is great on 3/8" and 1/2" plate, it is blue after all... I want to upgrade my smaller plasma and this seems like a nice machine. Plus I can eventually incorporate it into a cnc setup in the future. Also consumables seem to be decently priced. Overall it is cheaper than the hypertherm units, but still made in america.
    MillerMatic 251
    Maxstar 150 STH
    Cutmaster 42
    Victor Journeyman OA

    A rockcrawler, er money pit, in progress...

  • #2
    I bought mine 3 or 4 years ago & I like it. I have nothing to compare it to so I can't say if one is better or not but I'm happy with it. The only complaint I have is the torch lead is very stiff & doesn't get any better with age. My LWS does not stock consumables for it (they stock for the smaller machines) but I order from Miller4less. Cuts all gauge material fine as well as plate.
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250


    • #3
      There is a 40 amp tip available for the ICE-60T torch on the Spectrum 875 the part number for the 40 amp standard tip is 212725 and the part number for the extended or non-shielded 40 amp tip is 212729.
      Tim Lux
      Service and Aplications Specialist
      Miller Electric Mfg. Co