Announcement

Collapse
No announcement yet.

plz help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • JoeyGilchrest2
    started a topic plz help

    plz help

    Are there any tricks to getting a loan so that I can get my own welding machine somebody plz help

  • Doughboyracer
    replied
    And if I may...

    And if I may add, this isn't texting. You wont run out of spaces and you don't have to pay more for over 140 characters. Spell out what you want and feel free to use punctuation when needed...

    Leave a comment:


  • bbraman
    replied
    plz help

    You just said you were looking for a machine? As has been stated, there are a lot of machines out there! I'm just a hobbyist, but I know every local store, I have done business with them all. All welcome my questions and are eager to give advice
    If you have not all ready seen on this site, be specific, give as much info as you can, and search your topic before hand. I will almost guarantee it's been asked, and a few of the senior guys have given some great advice.

    Leave a comment:


  • cruizer
    replied
    Are you a qualified welder?, ie, have taken the proper schooling and graduated through an apprentiseship course.

    IF so just go to your local LWS they usually have outside loan companys in place for this purpose.

    Leave a comment:


  • JoeyGilchrest2
    replied
    plz help

    Ok thanks. What area are you working in

    Leave a comment:


  • walker
    replied
    You need to find out what is acceptable in the industry you are working in and for hte company you are working for, Miller is just fine here, they generally only spec the amount of amps you need to supply here, nothing brand specific.
    As far as buying it, I would buy a used welder until you can afford to pay cash for a new one. Plenty of engine drives out there cheap.

    Leave a comment:


  • JoeyGilchrest2
    replied
    plz help

    I was asking if millers in general were acceptable on pipelines bcuz I've heard that most only want Lincoln's

    Leave a comment:


  • WyoRoy
    replied
    Originally posted by JoeyGilchrest2 View Post
    R those acceptable on pipelines?
    If you're asking whether a Miller 211 or 252 is acceptable on pipelines you're going to need more help than anyone here can give.

    Leave a comment:


  • JoeyGilchrest2
    replied
    plz help

    R those acceptable on pipelines?

    Leave a comment:


  • bbraman
    replied
    plz help

    Don't know where you live? But my local Airgas has a lease program on most Miller machines, and on tanks. Might work for you? it is a little easier due to the fact they will come take the machine if you don't make your payment. I think the min is 36 months? Don't quote me on that. Payments are relatively low on a MM 211, or 252. Worth a shot!!

    Leave a comment:


  • go2building
    replied
    plz help

    Keep your credit standings good and don't default on loans. Don't borrow more than you can pay back.
    Kevin

    Leave a comment:

Working...
X