Announcement

Collapse
No announcement yet.

need good tips

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • need good tips

    Anyone have any quick and easy tip to keep slotted holes in line with each other when punching with ironworker? Without building a jig

  • #2
    need good tips

    If I don't need a jig, I use my eyeball.

    Comment


    • #3
      need good tips

      Unless they need to be "perfect" use a wall of the building or something that is straight like a edge of the ironworker that you can see while using the equipment. Draw you a line on the material and eyeball your marked line either parallel or perpendicular to reference.

      Comment


      • #4
        Originally posted by BearM:297379
        Unless they need to be "perfect" use a wall of the building or something that is straight like a edge of the ironworker that you can see while using the equipment. Draw you a line on the material and eyeball your marked line either parallel or perpendicular to reference.
        Thats what i ended up doing.. i only had 50 clips to make. I have a jig made but it wouldnt work for this particular job cause the slots were too close to the edge. I appreciate the suggestion

        Comment

        Working...
        X