We just added a tigmate 3 to and old syncrowave 250 at work. I was busy with another project when it came in and someone else installed it and hooked everything up. Yesterday was the first time I have tigged anything since. Well in a hurry and getting late in the day I flipped the welder power on, started to weld and burnt a hole in the hose. Everywere I have ever welded with a tig cooler on the welder, the cooler was left on and pluged into the switched outlet on the welder. The 250 has a switched outlet on it and the cooler is pluged into it. I have checked all the manuals and cannot find anything saying you can leave the cooler power on or not to. Which way should it be done?
No announcement yet.
Tig Cooler On or Off