Announcement

Collapse
No announcement yet.

Trailblaser 302 running a dynasty 300

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Murr
    started a topic Trailblaser 302 running a dynasty 300

    Trailblaser 302 running a dynasty 300

    Does anyone do this on a regular basis?
    I have no option to plug into power, due to the fact project is at least 9kms from the closest power line...

    Will a newer 302 run a dynasty 300dx tig on AC 250amp/????

  • cruizer
    replied
    It's pretty dirty power to run such a expensive machine on, though I suppose it would work, The internal inverter system should handle it. Why do you need to run it in the field anyways. Not difficult to tig off your TB even in AC with a hf box.

    Leave a comment:


  • Broccoli1
    replied
    Looks like the 300dx is rated at 61amps Input for 250amps welding output.

    TB302 only has 11,000watts of continuous power

    11,000/240v = 45amps.

    http://www.millerwelds.com/om/o358ag_mil.pdf

    http://www.millerwelds.com/pdf/spec_sheets/ED4-78.pdf

    Leave a comment:

Working...
X