Announcement

Collapse
No announcement yet.

Trailblaser 302 running a dynasty 300

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trailblaser 302 running a dynasty 300

    Does anyone do this on a regular basis?
    I have no option to plug into power, due to the fact project is at least 9kms from the closest power line...

    Will a newer 302 run a dynasty 300dx tig on AC 250amp/????
    MM 130 110v Mig
    Spectrum Cutmate 300 110v/240v Plasma
    Syncrowave 250 Tig, oldie but welds nice
    Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time

  • #2
    Looks like the 300dx is rated at 61amps Input for 250amps welding output.

    TB302 only has 11,000watts of continuous power

    11,000/240v = 45amps.

    http://www.millerwelds.com/om/o358ag_mil.pdf

    http://www.millerwelds.com/pdf/spec_sheets/ED4-78.pdf
    Ed Conley
    http://www.screamingbroccoli.net/
    MM252
    MM211
    Passport Plus w/Spool Gun
    TA185
    Miller 125c Plasma 120v
    O/A set
    SO 2020 Bender
    You can call me Bacchus

    Comment


    • #3
      It's pretty dirty power to run such a expensive machine on, though I suppose it would work, The internal inverter system should handle it. Why do you need to run it in the field anyways. Not difficult to tig off your TB even in AC with a hf box.

      Comment

      Working...
      X