Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Tig welding pedals universal? RCF-23GD25A

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tig welding pedals universal? RCF-23GD25A

    I found a welding pedal on eBay it has 2 plugs one is an older three-pronged Twist style and the other has straight pins. do these pedals to use both plugs at the same time or one or the other?

  • #2
    The 3 pin is for resistance control, whilst the 2 pronger is for contactor control.
    You could easily whack the plugs off and put a 5 or 14 pin on the cable and do the same thing for another machine.

    Comment

    Working...
    X
    Special Offers: See the latest Miller deals and promotions.