Announcement

Collapse
No announcement yet.

Can I use TIG filler rod to stick weld?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can I use TIG filler rod to stick weld?

    Ok so I know this isn't ideally the way to go about a tack weld, but I have a trailer that I need to move and the wheel wells are all busted up an not hanging on very well. I have the Maxstar 150STL and I have loaned out my bottle and TIG wand, and all I have in my case is my stick wand. Not really in the neighborhood of any parts store and all I have is some #12AWG solid copper wire and some ER70S-2.... So... Ya, that's about it

    Thanks

    Robert

  • #2
    No not really...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      ?

      Ahhhh NO

      Comment


      • #4
        Wand?

        Comment


        • #5
          The flux on the stick rods are what keep the arc stable to weld with. In this case it seems some angle and bolts would be best.

          Comment

          Working...
          X