Announcement

Collapse
No announcement yet.

miller remote issue

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • miller remote issue

    I picked up a 3 turn weld remote for my Trailblazer 301G on Friday and finally had a chance to hook it up and try it just a few moments ago. I hooked the cable into the machine remote receptacle and flipped the switch from panel to remote, went inside and hooked the cable to the remote box. Threw a 1/8 7018 into the stinger and tried welding. There was hardly an arc no matter how hot I put the remote setting. I plugged a grinder into it and nothing. Walked over to the machine and it worked so I know it's not the plug.. Anything I am missing?

    Thanks for the help.

  • #2
    Well you don't whine about it here, you look at he faceplate, and call me in the morning.

    Comment


    • #3
      Easy... Just thought I might have missed something, before calling you looking like an ideot. Thanks cruizer, appreciate it.

      Comment

      Working...
      X