Announcement

Collapse
No announcement yet.

MIllermatic 200 & 22A Feeder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • dmerd
    started a topic MIllermatic 200 & 22A Feeder

    MIllermatic 200 & 22A Feeder

    Can I run a 22A feeder off my Millermatic 200 or Syncrowave 250DX? I want to set up a feeder for dual sheild. Both have the 14 pin connector.
    Thanks,
    Dave
    Last edited by dmerd; 10-25-2012, 08:45 AM.

  • dmerd
    replied
    Thanks for the reply. I do use it for dual shield. I just thought maybe I could hook up a feeder and keep from switching back and forth.
    Dave

    Leave a comment:


  • duaneb55
    replied
    Yes, the 22A will run off the MM200 by simply plugging in the 14-pin and connecting the weld output cable to the (+) receptacle on the MM200 same as you would for the Spoolmatic 3 spool gun.

    But I have to ask as MMW did - why not just run the dual shield off the MM200? Do you want/need to swap back and forth often or quickly?

    Leave a comment:


  • walker
    replied
    I suppose you could figure out how to run a feeder off your MM200, but why would you want to?

    Leave a comment:


  • MMW
    replied
    As far as I know you can't run a 22a on the syncro as it is a cc machine & you need cv for mig. Why wouldn't you just run the dual shield in your mm200?

    Leave a comment:

Working...
X