Announcement

Collapse
No announcement yet.

MIllermatic 200 & 22A Feeder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • MIllermatic 200 & 22A Feeder

    Can I run a 22A feeder off my Millermatic 200 or Syncrowave 250DX? I want to set up a feeder for dual sheild. Both have the 14 pin connector.
    Thanks,
    Dave
    Last edited by dmerd; 10-25-2012, 08:45 AM.

  • #2
    As far as I know you can't run a 22a on the syncro as it is a cc machine & you need cv for mig. Why wouldn't you just run the dual shield in your mm200?
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      I suppose you could figure out how to run a feeder off your MM200, but why would you want to?

      Comment


      • #4
        Yes, the 22A will run off the MM200 by simply plugging in the 14-pin and connecting the weld output cable to the (+) receptacle on the MM200 same as you would for the Spoolmatic 3 spool gun.

        But I have to ask as MMW did - why not just run the dual shield off the MM200? Do you want/need to swap back and forth often or quickly?
        MM200 w/spot controller and Spoolmatic 1
        Syncrowave 180 SD
        Bobcat 225G Plus LPG/NG w/14-pin*
        *Homemade Suitcase Wire Feeder
        *HF-251D-1
        *WC-1S & Spoolmatic 1
        PakMaster 100XL
        Marquette "Star Jet" 21-110

        Comment


        • #5
          Thanks for the reply. I do use it for dual shield. I just thought maybe I could hook up a feeder and keep from switching back and forth.
          Dave

          Comment

          Working...
          X