Announcement

Collapse
No announcement yet.

Welded on a Lambo

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welded on a Lambo

    So apparently it is quite common for the Lamborghini gallardo shifter to break so, my buddy calls the factory and they say, yes it is common but is not a recall. So the price from the factory is 1500. He calls some welding shops and no body will even touch it except one shop who says 300. Not bad but then my buddy calls me and I say just bring it on over and I will take care of it no problem hahahaha

    I had to weld a piece of Stainless Steel all thread to the shaft coming off of the tranny....came out great and he can now shift his Gallardo again





    syncrowave 250
    millermatic 140 with spool gun
    350 dully with 225
    spectrum 375
    lateral band saw
    14in vertical band saw
    14in cold cut saw
    and now a 24x40 shop

    ALL THE STUFF I HAVE BUILT

    www.facebook.com/studiostevens

  • #2
    Great good.
    Old cars they will keep you poor.

    Ji
    Grip it and Rip it

    Comment


    • #3
      Did you do that with the Sync 250?

      Comment


      • #4
        Originally posted by Helios View Post
        Did you do that with the Sync 250?
        Yes I did, and I was able to use my thumb switch.
        syncrowave 250
        millermatic 140 with spool gun
        350 dully with 225
        spectrum 375
        lateral band saw
        14in vertical band saw
        14in cold cut saw
        and now a 24x40 shop

        ALL THE STUFF I HAVE BUILT

        www.facebook.com/studiostevens

        Comment


        • #5
          Cool

          The only vehicles I get to weld on is Tractors and Farm equipment - I guess they are just as expensive tho

          Comment


          • #6
            Originally posted by willy View Post
            The only vehicles I get to weld on is Tractors and Farm equipment - I guess they are just as expensive tho
            my buddy said it was 295000 with all the options. I just said wow, I rather have a 65 Shelby Coupe but a real one is alot more then just 300,000 hahaha Still rather have an old classic then a new exotic
            syncrowave 250
            millermatic 140 with spool gun
            350 dully with 225
            spectrum 375
            lateral band saw
            14in vertical band saw
            14in cold cut saw
            and now a 24x40 shop

            ALL THE STUFF I HAVE BUILT

            www.facebook.com/studiostevens

            Comment

            Working...
            X