Announcement

Collapse
No announcement yet.

Generator Question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Generator Question

    I have never welded with my Miller 211 off a generator. Found a deal on one. Was wondering what to look for while test running it before I buy. It has 7,000 running and 12,000 surge watts so it should push the welder just fine. But I know nothing about generators, so if anyone can help me with assurance before I buy it would be greatly appreciated. It's a 6 year old General. He's asking $430. Thanks!

  • #2
    Yep, giver, I see no problems

    Comment


    • #3
      Generac I meant.
      Last edited by Packers To Super Bowl !!; 10-15-2012, 09:31 PM.

      Comment


      • #4
        Anything to look for during the test run? I just plan on bringing a 4 foot piece of steel and cranking it all the way up, then lay a fat bead that long. That should be all I need to do do to feel comfortable buying??

        Comment


        • #5
          Actually, what you want to bring is a meter, is case the unit is running way over, or way under voltage and frequency

          You should probably meter the machine BEFORE you plug ANYTHING into it.

          Just a thought.

          Comment


          • #6
            Why would you need to lay a 4' weld to test it?

            Comment


            • #7
              Not sure if that's necessary now, would just a voltage tester in the .240 outlet all I need to check.?

              Comment


              • #8
                Originally posted by Packers To Super Bowl !! View Post
                Not sure if that's necessary now, would just a voltage tester in the .240 outlet all I need to check.?
                You need to Check the HZ also

                If your meter doesn't do this you can actually do it with a a Kill-a-Watt, about 10 bux at Lowes.

                You'll need 2 lights or something else to to plug in the receptacles to put a load on the generator. Space heaters work.

                Just plug the 2 120v loads in to 2 separate receptacles.
                Ed Conley
                http://www.screamingbroccoli.net/
                MM252
                MM211
                Passport Plus w/Spool Gun
                TA185
                Miller 125c Plasma 120v
                O/A set
                SO 2020 Bender
                You can call me Bacchus

                Comment


                • #9
                  Ed,
                  What's the purpose of the above test ?

                  .........Norm
                  sigpic
                  Sunrise Outside My Shop In Delhi, Ontario

                  - Arcair- K 4000 CAC.

                  - LN-25 Wire Feeder

                  - Lincoln Ranger 8- Engine Drive- CC\CV:



                  - Lincoln Power Mig 180C
                  - Spoolgun.
                  - DeWalt Chop Saw .
                  - DeWalt Compressor - 13cfm, @ 100 psi.

                  www.normsmobilewelding.blogspot.com

                  Comment

                  Working...
                  X