Announcement

Collapse
No announcement yet.

I need info on a welder please help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I need info on a welder please help

    I need any information any one can give me on a used welder I am thinking about getting. It's an Acklands welder but it would have be made by Miller. From what I have been told they just painted a miller welder orange instead of blue. Not sure if that is true or not it's just what I heard. Any ways the here is what I have for info "Acklands Welder Model N-250 AC/DC/P/HF" It's just over a 2 hour drive so I haven't seen it yet and won't be able to drive out there until next sunday. I am inteerested in it for tig welding.

    Is there anything anyone can tell me about this welder before I drive out there to see it?

    Thanks,

    Josh
    Hobart Mega Arc 5040DD (with built in air compressor)
    MM Passport Plus with Q-gun
    O/A

    sold MM 251

    There are only 2 tools needed in a tool box. 1) Duct tape to fix any thing that moves that isn't supposed to. 2) WD40 to fix anything that doesn't move but should.

  • #2
    Maybe this photo can help to ID this welder
    Attached Files
    Thermal Arc GTSW400, Airco Heliwelder II, Miller Dynasty 350, Hypertherm 1000, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.:

    Call me the "Clouseau" of welding !

    Comment


    • #3
      I have a photo that I will try to post later it is similar to that one but also different the photo I have isn't very good.
      Hobart Mega Arc 5040DD (with built in air compressor)
      MM Passport Plus with Q-gun
      O/A

      sold MM 251

      There are only 2 tools needed in a tool box. 1) Duct tape to fix any thing that moves that isn't supposed to. 2) WD40 to fix anything that doesn't move but should.

      Comment


      • #4
        Hf-250P

        Comment


        • #5
          This might be the DIALARC HF-P

          Go here:

          http://www.millerwelds.com/service/locate_om.php

          and look it up.

          Manual should be this: o315u_mil.pdf

          It is too large to attach it.

          If it is your machine, please thank Cruizer.
          Thermal Arc GTSW400, Airco Heliwelder II, Miller Dynasty 350, Hypertherm 1000, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.:

          Call me the "Clouseau" of welding !

          Comment


          • #6
            It looks similar to the one in the pdf. Here is a picture I was sent so hopefully someone can identify it from the picture. Sorry its not a great photo.

            Click image for larger version

Name:	Photo_du_...jpg
Views:	1
Size:	93.7 KB
ID:	515079
            Hobart Mega Arc 5040DD (with built in air compressor)
            MM Passport Plus with Q-gun
            O/A

            sold MM 251

            There are only 2 tools needed in a tool box. 1) Duct tape to fix any thing that moves that isn't supposed to. 2) WD40 to fix anything that doesn't move but should.

            Comment


            • #7
              Ummm, we already answered your question, Its a DIALARC HF250 P

              Comment

              Working...
              X