Announcement

Collapse
No announcement yet.

Trailblazer Cover Needed?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trailblazer Cover Needed?

    I've got my TB302 mounted in the back of my truck. It doesn't get covered parking.

    Is the welder going to be ok when it starts raining? Or do I need to cover it to keep water off?

    Thanks.
    Lincoln Vantage 400
    Trailblazer® 302 Air Pak™

    Miller Dynasty® 350
    Millermatic 350P Aluminum
    Millermatic® 252
    Syncrowave 351
    Lincoln LN-25 Pro

    Multimatic™ 200

    XR-Aluma Pro Gun
    Diversion™ 180

    Spectrum® 625 X-TREME™

    Thermal Dynamics® Cutmaster® 52
    Victor Oxy/Acetylene Set

  • #2
    I'd say yes but that's just me. I see you're from Tracy. I'm from Stockton.
    Last edited by RCASPY85; 10-08-2012, 12:03 PM.

    Comment


    • #3
      Mine has been truck nounted for the last four years,and never had a problem. The only time i cover it is during,and after snowstorms. The amount of salt that is used on the roads is what concerns me.

      Comment


      • #4
        $375 + Shpping full working cover, ie, you don't have to remove it to use the welder.

        Comment


        • #5
          cover

          Can you send me a pic.of one that's sounds like what I have been looking for
          ARMOR
          MOBILE WELDING&SERVICES
          Trailblazer 302
          X-TREME 12VS
          Spoolmatic 30A
          Millermatic 135
          WeldCraft WPseries TIG torch
          Smith oxy set.

          Comment


          • #6
            Originally posted by cruizer View Post
            $375 + Shpping full working cover, ie, you don't have to remove it to use the welder.
            Nice. I'll look for that one.

            I did email Miller and they said the Trailblazer is designed to withstand the weather. But I'll get one anyway just to keep'er looking new.
            Lincoln Vantage 400
            Trailblazer® 302 Air Pak™

            Miller Dynasty® 350
            Millermatic 350P Aluminum
            Millermatic® 252
            Syncrowave 351
            Lincoln LN-25 Pro

            Multimatic™ 200

            XR-Aluma Pro Gun
            Diversion™ 180

            Spectrum® 625 X-TREME™

            Thermal Dynamics® Cutmaster® 52
            Victor Oxy/Acetylene Set

            Comment


            • #7
              I'll need a TB to stick it on, though they go out just as fast as they come in.

              Comment


              • #8
                TB Cover

                Cruizer, please post a photo of the cover. I might want one.

                Comment


                • #9
                  not trying to steal anybodys thunder....

                  http://www.millerwelds.com/resources...t=welder+cover



                  Check out the #18 posting, some pics of the covers , Best to check with the man to see if anything has changed on them, They are the cats meow!
                  P.S. Cruizer is the man!
                  I have a welding addiction

                  ...the only stupid question is the one you didn't ask

                  Comment


                  • #10
                    The exhaust cut out was kinda squrrelly, thats been changed

                    Comment


                    • #11
                      Is there one specifically with the air-pak cut out?
                      Lincoln Vantage 400
                      Trailblazer® 302 Air Pak™

                      Miller Dynasty® 350
                      Millermatic 350P Aluminum
                      Millermatic® 252
                      Syncrowave 351
                      Lincoln LN-25 Pro

                      Multimatic™ 200

                      XR-Aluma Pro Gun
                      Diversion™ 180

                      Spectrum® 625 X-TREME™

                      Thermal Dynamics® Cutmaster® 52
                      Victor Oxy/Acetylene Set

                      Comment


                      • #12
                        Can not run this horse with any cover

                        Is there one specifically with the air-pak cut out?[/QUOTE]

                        When not in use and cool, cover it.

                        Miller sells a cover for $140.

                        Just Jim

                        Comment


                        • #13
                          There is just not enough airpacks around to justify making a cover for one, as for Miller covers, giver. You have to remove it when the machine is in use, and its not insulated. At -30 thats all I want to do is get up on my rig and remove the snow, remove the now hard Miller cover, then hope to heck that it starts. End of shft, brush the snow snd moisture off the machine, and close it up with that cover. And hope that it doesn't freeze to the machine for the next day.

                          With a 50 wt pan heater under the engine (on a TB, and other) plus an insulated cover, that engine and generator is warm. Open the front flap and start it up. Weld away, end of shift, close the front flap, go home.
                          Last edited by cruizer; 10-10-2012, 10:55 AM.

                          Comment


                          • #14
                            love to run one about 27-28 volts all day

                            Comment

                            Working...
                            X