No announcement yet.

Bobcat 225 NT died and will not do anything

  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Replaced the D-4 Diode Board and the welder is working fine. Thanks for all your help.


    • #17
      Fantastic. Thanks for the follow up.
      MM200 w/spot controller and Spoolmatic 1
      Syncrowave 180 SD
      Bobcat 225G Plus LPG/NG w/14-pin*
      *Homemade Suitcase Wire Feeder
      *WC-1S & Spoolmatic 1
      PakMaster 100XL
      Marquette "Star Jet" 21-110


      • #18
        I've got something similar to this and it want let me post a new thread so I'll put it here.. please help
        Really need some help on this one, yesterday I welded with my bobcat 225g plus for several hours with no issues, this morning I come out to continue my work and I went to start it and it tred to start 4 or 5 times but was having a hard time due to a dead battery but I had it on a charger, and after a few try it just stopped, now when I turn the ignition switch to start it doesn't do anything, it doesn't click, doesn't spin, it's like it doesn't even have a battery. I checked the oil it was about a half pint low, filled that, it's full of fuel, this machine has a little under 1800 hours on it. What could cause it to do this? I've read maybe a f6 fuse but I don't know why it would blow when all I was doing was trying to start it..??