Announcement

Collapse
No announcement yet.

Sincrowave.....or .....Dynasty

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sincrowave.....or .....Dynasty

    Looking for a new 200A tig... what do you think?

  • #2
    Dynasty DX

    I the more I use my Dynasty DX, the more I like it.
    Good Luck,
    Bob


    Edit: I sold my Syncrowave 250 to get the Dynasty.
    Last edited by Bob Miller; 04-07-2012, 08:44 PM. Reason: add stuff
    Millermatic 252 w/30A
    Big Blue Air Pak
    Ellis 3000 Band Saw
    Trailblazer 302 Air Pak w/ Wireless Remote
    8-RC
    Dynasty 200 DX
    XMT 350 MPa w/S-74 MPa Plus
    Millermatic 211
    Passport Plus
    Spectrum 625 X-TREME
    Lincoln SA-200 Blue Tint Red Face '63
    2-Lincoln SA-200 Red Face '68
    SA-200 Black Face '59
    SA-200 Green Lite '84
    SA-200 Green Lite '80
    SA-200 Red Face '69
    SA-200 Red Face '66
    SA-200 Green Lite '81
    '70 Black Face Round Barrel

    Comment


    • #3
      Sincrowave.....or .....Dynasty

      Have both, never use the syncrowave, want to purchase it. Took my Dynasty 200 to manhattan to install a cage today(little stick welding, inside) 50#, 110v can't do that with Syncrowave. $$$ extra if you have the $3000 extra then get the Dynasty 200DX compleat water cooled and get an are cooled torch for easy portability. Or the 280 will be out sooooon er or later, NO 110V
      Kevin

      Comment


      • #4
        around and around it goes...

        This has been discussed a few times before... and a few times before that....

        this thread is worth reading...

        http://www.millerwelds.com/resources...-DX-or-Dynasty
        .

        *******************************************
        The more you know, The better you know, How little you know

        “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

        Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

        My Blue Stuff:
        Dynasty 350DX Tigrunner
        Dynasty 200DX
        Millermatic 350P w/25ft Alumapro & 30A
        Millermatic 200

        TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

        Comment

        Working...
        X