Announcement

Collapse
No announcement yet.

Welcome to the MillerWelds.com Discussion Forums

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by 'Stang View Post
    I'm sorry if I'm in the wrong area. My girlfriend just inherited her fathers welder. It is a MillerMatic 35. I have no idea about one this old. I am teaching her to weld, starting with mig, then tig! How do I clean the dirt dawbers and wasp nest out without damaging the machine? This machine was bought on the 70s-but it has serious sentimental value to my little buddy
    I copied and moved this over to it's own thread so it can get proper attention..

    see it under "Stang"s MM-35" in the general discussion area..

    http://www.millerwelds.com/resources...-Stang-s-MM-35
    Last edited by H80N; 11-24-2013, 07:13 AM.
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #32
      Cleaning oxidizing around aluminum welds

      Hi, I am brand new to this forum and not sure if I am in the right place to ask this question. I weld 3003 .090 aluminum with a 4043 filler rod and get a white oxidizing on the sides of the weld, does any one know how to clean this? I would really appreciate some help, new to TIG welding. Thank you - Gary

      Comment


      • #33
        Hello from east side of Canada !! , i am looking foward to try my new to me MM211 , and gathering the most information here ,since i don 't weld for leaving ,(electrician), i am a garage warrior
        Last edited by sunsation288; 02-17-2014, 06:13 AM.
        I will try my best to be understood


        MY DREAM GARAGE

        sigpic

        Comment


        • #34
          willy come lately

          Hey everybody, Ive been lurkin around here for a little while, adding comments here and there you know just pokin around (on my phone). I frequent the Miller site quite often(on my comp.), I love to weld, it never really dawned on me to visit the new member forum until After I read all the posts in the legendary "YMBAWI" thread. So... kudos to everyone who visits and I love the site.
          And thanks for having me, I know its a little late

          Comment


          • #35
            millermatic 211

            new here, didn't know where to jump in. just bought a 211 auto-set and a spool mate 100 for occasional fix it projects and light fabrication. I am not a real experienced welder but I have owned and do own several machines. The problem I am having with the 211 is that I can not get a reliable weld when welding alum. It's a dirty, sooty, splattery looking weld. I've played with the gas made hundreds of adjustments with heat and feed,angle,tip distance,speed,travel,wire and even excessive cleaning of material.When I do get a successful weld it's not a weld I am proud of, I mean it has good penetration and all but it just doesn't present well. I did read a review from another customer that had similar issues, is it the gun or me? would appreciate any ideas

            Comment


            • #36
              Old lurker of the forum here but just now registered to post questions.

              Been getting bids together for two weeks on a new Dynasty 350 for work around the shop. Novice tig welder with light experience with the dynasty 350.

              I can't wait to learn more on that machine.

              Shannon

              Comment


              • #37
                Millermatic 35s

                Looking for running gear for a millermatic 35.

                Comment


                • #38
                  deposition efficiency

                  I am in welding school and don't quite understand the meaning of deposition efficiency. I know it is the relationship of the weight of the weld metal deposited to the weight of the electrode or wire. And after each pass the slag must be removed or you lose deposition efficiency. But I don't really understand what that means. Any easier way to explain?
                  My Blue Stuff: Millermatic 211 Auto-Set

                  You know you're a welder when... You miss your court date because you stood outside the courthouse looking at the welds on the handrails.

                  "If the thats the worst thing that could happen to us all day, then we'll be doing pretty good"

                  Comment


                  • #39
                    Spectrum 625

                    New Here Just bought a 907058,LG280364P Would like to find a manual and parts listing. Gave 800 for it was mainly use for aluminum cutting as the company was a trailer fab company. Hope did not make the wrong choice.

                    Comment


                    • #40
                      Spectrum 625

                      New Here Just bought a 907058,LG280364P Would like to find a manual and parts listing. Gave 800 for it was mainly use for aluminum cutting as the company was a trailer fab company. Hope did not make the wrong choice.

                      Comment


                      • #41
                        Spectrum 625

                        New Here Just bought a 907058,LG280364P Would like to find a manual and parts listing. Gave 800 for it was mainly use for aluminum cutting as the company was a trailer fab company. Hope did not make the wrong choice.

                        Comment


                        • #42
                          New user, Millermatic 141

                          The machine shipped with a roll of .030" wire and .030"contact tips. I purchased .023" wire and .023" contact tips. Is it necessary to change the liner to .023" as well?

                          Comment

                          Working...
                          X