Announcement

Collapse
No announcement yet.

What Year

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • What Year

    New here Could someone Help me ID what years they made a Miller AEAD 200 LE with the plug selector front where you must change the plug to change amps every time. Found a nice looking one but I think it may be pretty old.

  • #2
    Check the serial number against the chart and you will know what year it is....

    http://www.millerwelds.com/service/s...reference.html

    you might print out the chart and keep it in your pocket for reference when you go looking at machines... that way you can check then...
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      Thanks for the chart. I can't get a serial number just yet didn't want to bother him agian till I had an idea about the age. I had hoped I could narrow it down by the plug in front have not seen to many of them.

      Comment


      • #4
        you can always try looking through the manuals...

        http://www.millerwelds.com/service/o...uals.php?model

        the problem with that is... that lacking a serial number it will return the newest version...
        .

        *******************************************
        The more you know, The better you know, How little you know

        “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

        Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

        My Blue Stuff:
        Dynasty 350DX Tigrunner
        Dynasty 200DX
        Millermatic 350P w/25ft Alumapro & 30A
        Millermatic 200

        TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

        Comment


        • #5
          Here is a picture of what it looks like. This is not it his looks much better.
          Attached Files

          Comment


          • #6
            Looks to be in the 70's how hard would it be to find part for a Onan that old now and in the future and the miller part?

            Comment


            • #7
              Here are a couple pictures of the welder what do you guys think.
              Attached Files

              Comment


              • #8
                Thanks for the help I think it's just to old maybe mid 70's.
                Thanks David

                Comment


                • #9
                  Originally posted by daverd4 View Post
                  Looks to be in the 70's how hard would it be to find part for a Onan that old now and in the future and the miller part?
                  Not that hard. Member onanparts.com has a full compliment of parts for the Onans and miller4less.com carries a host of parts for the AEADs not to mention many "off the shelf" parts were and continue to be used on Millers.

                  Originally posted by daverd4 View Post
                  Thanks for the help I think it's just to old maybe mid 70's.
                  Thanks David
                  Shouldn't let that stop you. Still a much better machine than the bargain basement stuff being offered today.
                  MM200 w/spot controller and Spoolmatic 1
                  Syncrowave 180 SD
                  Bobcat 225G Plus LPG/NG w/14-pin*
                  *Homemade Suitcase Wire Feeder
                  *HF-251D-1
                  *WC-1S & Spoolmatic 1
                  PakMaster 100XL
                  Marquette "Star Jet" 21-110
                  http://www.millerwelds.com/images/sm...rolleyes.png?2

                  Comment

                  Working...
                  X