If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I called my local dealer that sells Miller and both the relay and the delay timer are available.
The relay is in the $35 range, but the delay timer is in the $400 + range.
A clever lad, that knew electronics, could build that timer for $10.
For about $50 you can buy a delay timer relay with the potentiometer on the relay itself.
I was just talking to the Miller techs and that "pre flow timer" was never intended for my machine. Instead a sequencer or slope kit was intended for my tig runner. My machine was made in 2002 and no accessories like this are available for me either.
I will acquire the service manual and see if I want to fab this stuff myself.