Announcement

Collapse
No announcement yet.

spray arc ?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • spray arc ?

    i went to a job interview the other day and they asked if i did spray arc welding , ive heard of it but never done it before , so they had me take a couple welding tests doing spray arc and it was super easy and kinda fun ,, so what im wonder is can i spray arc with my mm252 ? and how would i need to set it ?

  • #2
    your 252 will spray. you need at least 85/15 gas preferably 90/10. depending on the metal thickness you have to crank your volts and wire speed up.
    miller 225 bobcat
    miller aead200le (with miller hf tig trailer mounted)
    mm175, mm211, TA181i
    mm252 w/30a spool gun
    precision tig 225
    hobart stickmate LX ac/dc
    Speedglas 9100X & XX / Miller Digital Elite
    hypertherm 380 & cutmaster 52
    victor journeyman & super range
    ridgid chop saw, kalamazoo band saw
    steel max and evolution carbide saws
    6 4.5" & a 20lb 9" rockwell grinders
    case 580 backhoe (for what i can"t lift)
    if first you don't succeed
    trash the b#####d

    Comment


    • #3
      Got to the top of the page and click on the Resources tab.

      Look for Miller's offer for their "Student Pack".

      It's $25 including shipping. Order it. Best $25 you'll ever spend on welding.

      Has an excellent Tig Handbook, a GMAW Handbok, a GMAW-P Handbook, and a bunch of other useful goodies (like welding calculators).
      Syncrowave 250 DX Tigrunner
      Dynasty 200 DX
      Miller XMT 304 w/714D Feeder & Optima Control
      Miller MM 251 w/Q300 & 30A SG
      Hobart HH187
      Dialarc 250 AC/DC
      Hypertherm PM 600 & 1250
      Wilton 7"x12" bandsaw
      PC Dry Cut Saw, Dewalt Chop Saw
      Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
      Thermco and Smith (2) Gas Mixers
      More grinders than hands

      Comment


      • #4
        Calculators

        The Calculators that SundownIII refers to have spray arc settings.
        Good Luck,
        Bob
        Millermatic 252 w/30A
        Big Blue Air Pak
        Ellis 3000 Band Saw
        Trailblazer 302 Air Pak w/ Wireless Remote
        8-RC
        Dynasty 200 DX
        XMT 350 MPa w/S-74 MPa Plus
        Millermatic 211
        Passport Plus
        Spectrum 625 X-TREME
        Lincoln SA-200 Blue Tint Red Face '63
        2-Lincoln SA-200 Red Face '68
        SA-200 Black Face '59
        SA-200 Green Lite '84
        SA-200 Green Lite '80
        SA-200 Red Face '69
        SA-200 Red Face '66
        SA-200 Green Lite '81
        '70 Black Face Round Barrel

        Comment


        • #5
          Theres 3 different modes of transfer with Mig. Short circuit, globular and spray. Basically what's happening with Spray is the wire is melting before it contacts the plate and "sprays" onto the metal and wets in. In a normal short circuit setting, the one your used to, the wire actually contacts the plate, shorts out and melts into the plate. Spray needs a more Argon rich shielding gas to function. This is also done at much higher heat settings with thicker material.

          Comment

          Working...
          X