Announcement

Collapse
No announcement yet.

Wanting to buy a 350P?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wanting to buy a 350P?

    I am new here and it seems like a good place for advice. I am looking to buy a 350P with a push pull set-up for aluminum. I would like to find a good used one reasonably close to where I live. I found one about 1000 miles away that is about two years old. Is there any improvements from 2008 to a new model? The one I found looks to be in good shape but it is a long drive just to check it out. I may be better off buying new but that is a chunk of change. Thanks in advance!

  • #2
    I'd say buy one with serial# LH460185B and above, as there were a few changes in 2008

    Comment


    • #3
      Thats good to know, Thanks!

      Comment


      • #4
        Some one just put a 350P with a 30A spool gun up on eBay. It also come with two tanks(look to be 125cf or bigger), and the dual bottle rack. I forget the location, search millermatic 350p and it'll pop up. He has the starting bid set for $3300 and no bids yet. Might be worth checking out, could save you a couple grand.

        Comment


        • #5
          Thanks for the heads up. I'm going to check it out right now.

          Comment


          • #6
            I've been toying with the idea of selling mine.. I'm a bit far from you though.

            Machine has maybe 1 hour on it.

            I bought it new about 6 months ago and it still has over 2 years warranty. Has the push/pull gun XR-ALUMA-PRO 25FT. I bought it for $5500

            It's way overkill for what I do and it's been sitting in my heated basement with a bed comforter over it since, about an hour after I used it lol...

            Mint condition, 3 big spools of 4043 wire, 24-25 tips, and a couple other odds/ends, everything, manuals etc.

            If you are serious, I will bolt it back down to the original pallet it came on and have it delivered to your doorstep for 4200

            Let me see if I can dig some pics up...

            Thanks, Scott
            Last edited by Checkered Flag; 01-13-2011, 09:48 PM.
            Two Dynasty 350's with Wireless pedals
            Victor O/A
            Profax 250 weld positioner
            Bridgeport mill
            Logan Turret lathe
            RMD tubing bender
            Enco vertical saw
            Baileigh Auto cold saw
            IR 80 Gal dual stage compressor
            Misc Fab equipment

            Comment


            • #7
              Found some in my Iphone..Name:  402169a9e7e2fc4fb97b1596e0d3803c.jpg
Views: 1
Size:  50.3 KBName:  c560f8e191e34f583d0ce908e2c8d4f4.jpg
Views: 1
Size:  47.9 KBName:  a9516df0389d34e2ba327ff9e9659d88.jpg
Views: 1
Size:  42.2 KB
              Two Dynasty 350's with Wireless pedals
              Victor O/A
              Profax 250 weld positioner
              Bridgeport mill
              Logan Turret lathe
              RMD tubing bender
              Enco vertical saw
              Baileigh Auto cold saw
              IR 80 Gal dual stage compressor
              Misc Fab equipment

              Comment


              • #8
                Scott,
                Your 350p looks great. Is that 4200 including shipping? I sent you a message but not sure if I did it right so I thought I would reply here. I figured between the two you would see one of them. I am interested.

                Thanks, Wes

                Comment


                • #9
                  Yup, sitting on your door for 4200. I'll cover freight.

                  500 in extras as far as wire and consumables.

                  Great machine, just more than what I can use..
                  Two Dynasty 350's with Wireless pedals
                  Victor O/A
                  Profax 250 weld positioner
                  Bridgeport mill
                  Logan Turret lathe
                  RMD tubing bender
                  Enco vertical saw
                  Baileigh Auto cold saw
                  IR 80 Gal dual stage compressor
                  Misc Fab equipment

                  Comment

                  Working...
                  X