Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.


Announcement Module
No announcement yet.

Alumapro Head Tube Modification

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Alumapro Head Tube Modification

    I am in the sign / sheetmetal fabrication industry. We use a Miller 350P pulse machine with a Alumapro XR gun. 90% of our welding is spot welds on .090 alumnum from the back side, then sanded and finished (painted)on the front side. The limitations of the Alumapro head tube, even though it rotates, makes it very difficult to reach many areas of projects. There is not a 10" flexible extension like the 30A spool gun so options are very limited. Has anyone modified a head tube to fit in tight spots or took a 30A flex head tube and retrofitted it to the Alumapro? Are there aftermarket options available in head tubes for the Alumapro that I am missing? Any suggestions are welcomed. Spent $2K on a gun that will not do everything I need it to do.

  • #2
    Alumapro Head Tube Modification


    Special Offers: See the latest Miller deals and promotions.