Announcement

Collapse
No announcement yet.

miller blue star 2e

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • miller blue star 2e

    i have a miller bluestar 2e dc welder it worked fine except it was leaking gas from the carb so i took it apart and put it back together ,i fixed the leak but do not know the settings ,does anyone have a parts breakdown for the carborator and what the settings would be so i can get it to run properly any help would be appreiciated
    Rob
    -----------------------------------------------------------------------------
    trailblazer 302
    bluestar 2e
    miller suitcase
    airco spool gun
    miller hp 15 tig unit
    service truck c/w 2000 lb auto crane
    welding shop

  • #2
    I don't have a break-down handy but a typical starting point on mixture settings is usually 1-1/2 turns out from seated on both idle and main jet adjustments and go from there with the unit running.
    MM200 w/spot controller and Spoolmatic 1
    Syncrowave 180 SD
    Bobcat 225G Plus LPG/NG w/14-pin*
    *Homemade Suitcase Wire Feeder
    *HF-251D-1
    *WC-1S & Spoolmatic 1
    PakMaster 100XL
    Marquette "Star Jet" 21-110

    Comment


    • #3
      is the main jet setting the spring loaded needle valve on the bottom of the float bowl?
      Rob
      -----------------------------------------------------------------------------
      trailblazer 302
      bluestar 2e
      miller suitcase
      airco spool gun
      miller hp 15 tig unit
      service truck c/w 2000 lb auto crane
      welding shop

      Comment


      • #4
        Yes.
        MM200 w/spot controller and Spoolmatic 1
        Syncrowave 180 SD
        Bobcat 225G Plus LPG/NG w/14-pin*
        *Homemade Suitcase Wire Feeder
        *HF-251D-1
        *WC-1S & Spoolmatic 1
        PakMaster 100XL
        Marquette "Star Jet" 21-110

        Comment


        • #5
          miller bluestar 2e

          yes i just also bought a miller bluestar 2e ac/dc ive seen a bunch or heard of a bunch with blown motors with the Techumseh engine and was wondering if they r good welders and if i bought a good welder or a peice of junk thats goin to blow in three weeks i have welded with it and welds good but was just wondering if the motors r junk or not thanks

          Comment

          Working...
          X