Announcement

Collapse
No announcement yet.

Questions about a Big 30A

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Questions about a Big 30A

    I have found this Big 30A thats coming up for auction. It has a Deutz diesel. Around 2700 to 2800 hours on the meter. First question, is this thing updateable? I was reading in the manual that you could get options for a wirefeeder. I dont know the codes on the welder. The auction tag said it was a 1995 I think. Second question, The idle control doesnt work what could be wrong with that? Third question, what kind of market value does these have or going price? Its not too bad of shape, paints faded, side shields are there one needs work on the hinges. It has some leads, not sure of the lengths, in good shape. Starts and runs good. No smoke. Its mounted on a single axle trailer that looks homemade. Any ideas on this stuff?

    Thanks
    Steve
    Dont force it, use a BIGGER hammer.

    Linde VI-252C and Linde wire feeder.
    Hobart Cyberwave 300c.
    HH 140.
    Miller Big 40.
    Lincoln SAE 200J.
    Hobart GR-303.
    Lincoln tombstone welder.
    TD Cutmaster 52.
    Hobart Stickmate.
    Miller 211 w/ Spoolgun.
    Lincoln SA 200.

  • #2
    Bump!!!!!!
    Dont force it, use a BIGGER hammer.

    Linde VI-252C and Linde wire feeder.
    Hobart Cyberwave 300c.
    HH 140.
    Miller Big 40.
    Lincoln SAE 200J.
    Hobart GR-303.
    Lincoln tombstone welder.
    TD Cutmaster 52.
    Hobart Stickmate.
    Miller 211 w/ Spoolgun.
    Lincoln SA 200.

    Comment

    Working...
    X