Announcement

Collapse
No announcement yet.

I have a miller big 40 with an teledyne f163 motor

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I have a miller big 40 with an teledyne f163 motor

    This year it rained an awful lot and moisture got into valves which in turn after pulling head off the engine seems to be seized up anyone have any ideas should I try to free it up or replace the motor or rebuild the engine what other engines fit this same welder it welds like nothing else except bad engine someone please help I'm lost here

  • #2
    Very carefully rebuild IMO

    www.facebook.com/outbackaluminumwelding
    Miller Dynasty 700...OH YEA BABY!!
    MM 350P...PULSE SPRAYIN' MONSTER
    Miller Dynasty 280 with AC independent expansion card
    Miller Dynasty 200 DX "Blue Lightning"

    Miller Bobcat 225 NT (what I began my present Biz with!)
    Miller 30-A Spoolgun
    Miller WC-115-A
    Miller Spectrum 300
    Miller 225 Thunderbolt (my first machine bought new 1980)
    Miller Digital Elite Titanium 9400

    Comment


    • #3
      Rebuild

      Originally posted by maaxcam View Post
      This year it rained an awful lot and moisture got into valves which in turn after pulling head off the engine seems to be seized up anyone have any ideas should I try to free it up or replace the motor or rebuild the engine what other engines fit this same welder it welds like nothing else except bad engine someone please help I'm lost here
      Visit the following website: www.billswelderrepair.com He's in Oklahoma City, OK. Not sure where you live, but a Big 40 is worth repairing. Might want to go through the generator portion, and you'll have a new welder when your done.

      Dave
      Last edited by davedarragh; 04-07-2010, 08:20 AM.
      "Bonne journe'e mes amis"

      Comment


      • #4
        Well if the pistons are just frozen, there are 2 methods of unsticking them other than rebuild, one is to add about an inch of WD-40 liquid into the cylinders and let it sit for a couple of days.

        Or get yourself some rags and diesel fuel, stick a inch or so in the cylinders with the oil soaked rags and light it up. As long as the pistons are not at TDC, this method tends to work the best as it frees up the cylinders and piston rings through heat and lubrication.

        Comment

        Working...
        X