Announcement

Collapse
No announcement yet.

welding rig pictures

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Sorry J if I came across a little sarcastic but if we were all standing around and joking you'd hear it with my grinning mutt. Say, if you got some of Clay's work and on a Megacab w/skid, I wouldn't mind you posting some of those pics.

    Comment


    • #32
      Bob if I get time I'll post some tomorrow.
      Jason by all means if you get to it first your welcome to post em up.
      at home:
      2012 325 Trailblazer EFI with Excel power
      2007 302 Trailblazer with the Robin SOLD
      2008 Suitcase 12RC
      Spoolmatic 30A
      WC-24
      2009 Dynasty 200DX
      2000 XMT 304
      2008 Thermal Dynamics Cutmaster 52
      Sold:MM130XP
      Sold:MM 251
      Sold:CST 280

      at work:
      Invision 350MP
      Dynasty 350
      Millermatic 350P
      Retired:Shopmaster 300 with a HF-251

      Comment


      • #33
        No worries Bob, I took it as you intended it. Smart A$$.

        You bet Clay, I'll post 'em for ya.

        I'll leave the explanations to Clay, but shown are MegaCabs with tailgate (no work table) and without tailgate (with table and Oxy Fuel Reel)
        Attached Files
        Later,
        Jason

        Professional Spark Generator by Trade.

        Comment


        • #34
          Flames, Oilers?

          I'm not EVEN going to get in the middle of that one!

          The Doggies just keep loosing........ Good thing Spring Training started

          Blackwolf: That is a NICE looking truck! Great job on the cyl brackets.

          Is that a 305G?

          Dave
          "Bonne journe'e mes amis"

          Comment


          • #35
            Yeah Dave that is a 305G and the other one had a Pro 300 on it. We've also had 302 Trailblazers, Pipe Pro 304's, Vantage 300 and 400's, 300D's.

            We have a new propane cylinder bracket out but I don't have any pictures of it yet. It's basically the same we just addressed a few things that customers had suggested.
            at home:
            2012 325 Trailblazer EFI with Excel power
            2007 302 Trailblazer with the Robin SOLD
            2008 Suitcase 12RC
            Spoolmatic 30A
            WC-24
            2009 Dynasty 200DX
            2000 XMT 304
            2008 Thermal Dynamics Cutmaster 52
            Sold:MM130XP
            Sold:MM 251
            Sold:CST 280

            at work:
            Invision 350MP
            Dynasty 350
            Millermatic 350P
            Retired:Shopmaster 300 with a HF-251

            Comment


            • #36
              Originally posted by dmk welding View Post
              Here's some pics of my rig Ol' Blue...she's a tank but she's reliable. My next rig is definitely going to be lighter. Coalsmoke, your deck is awesome! Nice set up.
              I meant to say that Cornerstone's aluminum deck is awesome...sorry Coalsmoke, your rig is also nice as well, haha. Too bad that you sold it, eh. I was reading some of your views on your life as a rig welder on your web page the other day...very good stuff by the way. You're right that it's a tough job that demands alot at times, but it must be something in our blood that makes us stand beside our rigs with such pride. Not everyone understands that feeling out there.
              I can't wait till it gets busy again!!!

              Comment


              • #37
                Originally posted by davedarragh View Post
                I'm not EVEN going to get in the middle of that one!

                The Doggies just keep loosing........ Good thing Spring Training started

                Blackwolf: That is a NICE looking truck! Great job on the cyl brackets.

                Is that a 305G?

                Dave
                Thats okay Dave, everyone LOVES to poke fun at, ahem...Flames Fans.

                Comment


                • #38
                  Originally posted by dmk welding View Post
                  I meant to say that Cornerstone's aluminum deck is awesome...sorry Coalsmoke, your rig is also nice as well, haha. Too bad that you sold it, eh. I was reading some of your views on your life as a rig welder on your web page the other day...very good stuff by the way. You're right that it's a tough job that demands alot at times, but it must be something in our blood that makes us stand beside our rigs with such pride. Not everyone understands that feeling out there.
                  I can't wait till it gets busy again!!!
                  Thanks man, and thanks again to all who have complimented me on the deck. But really, don't you think the skid units that cwagner works on are that much nicer. I think there's some superb work coming out of ACE Manuf.

                  Comment


                  • #39
                    Thanks Cornerstone.
                    I like your deck, they did a nice job on it.
                    We are quoting a couple of decks, if we build one I'll post up some pics.
                    at home:
                    2012 325 Trailblazer EFI with Excel power
                    2007 302 Trailblazer with the Robin SOLD
                    2008 Suitcase 12RC
                    Spoolmatic 30A
                    WC-24
                    2009 Dynasty 200DX
                    2000 XMT 304
                    2008 Thermal Dynamics Cutmaster 52
                    Sold:MM130XP
                    Sold:MM 251
                    Sold:CST 280

                    at work:
                    Invision 350MP
                    Dynasty 350
                    Millermatic 350P
                    Retired:Shopmaster 300 with a HF-251

                    Comment


                    • #40
                      I totally agree about the product coming out of Ace and Clay personally. I was in there for a visit back in late Sept, I think, and got to see first hand some of Clay's work and he's very skilled on the aluminum that's for sure.
                      Someday I hope to be able to order a deck from there...someday.

                      Comment


                      • #41
                        They've earned it, I'll throw in my $.02

                        Double Thumbs Up to Clay and the staff at Ace Maunfacturing.

                        I have been scouring over their products for quite a while now, and the fit and finish are excellent. They offer a neat, clean organized skid unit, that really has no equal that I have found.

                        I wouldn't think twice about calling them up and having them build and ship me a skid - sight unseen - and know that I would be very satisfied when it arrived.

                        Clay has been very generous of his time, trading e-mails, pictures, and ideas with me over the past year or so. He has sent me numerous pictures of rig ups that are not available on the website, just for me to look at, and get my opinions. Man, oh, man... Some seriously NICE STUFF. I am very comfortable dealing with him.

                        Now, I do not usually indulge myself, and post up this type of testimonial, but times are tough, and I don't see why I can't spend a few minutes supporting a fellow forum member, and the company he works for.

                        Bob's deck is Top Shelf too - A work of Art.... I just don't wanna POLISH IT!!!
                        Last edited by Black Wolf; 03-03-2009, 08:16 PM.
                        Later,
                        Jason

                        Professional Spark Generator by Trade.

                        Comment


                        • #42
                          Thanks for the kind words DMK and Black Wolf.
                          I build every deck/ skid like it's going on MY truck.
                          Of course I can't build all of this stuff myself so when one of the other guys is building a part, I keep a pretty good eye on them and constantly stress to them how much the whole project is worth. Then I ask them what they'd want to see if it was THEIR MONEY, that's usually enough to keep them on their toes.

                          After all our motto is "Quality that outperforms".
                          at home:
                          2012 325 Trailblazer EFI with Excel power
                          2007 302 Trailblazer with the Robin SOLD
                          2008 Suitcase 12RC
                          Spoolmatic 30A
                          WC-24
                          2009 Dynasty 200DX
                          2000 XMT 304
                          2008 Thermal Dynamics Cutmaster 52
                          Sold:MM130XP
                          Sold:MM 251
                          Sold:CST 280

                          at work:
                          Invision 350MP
                          Dynasty 350
                          Millermatic 350P
                          Retired:Shopmaster 300 with a HF-251

                          Comment


                          • #43
                            Originally posted by Black Wolf View Post
                            Double Thumbs Up to Clay and the staff at Ace Maunfacturing.

                            I have been scouring over their products for quite a while now, and the fit and finish are excellent. They offer a neat, clean organized skid unit, that really has no equal that I have found.

                            I wouldn't think twice about calling them up and having them build and ship me a skid - sight unseen - and know that I would be very satisfied when it arrived.

                            Clay has been very generous of his time, trading e-mails, pictures, and ideas with me over the past year or so. He has sent me numerous pictures of rig ups that are not available on the website, just for me to look at, and get my opinions. Man, oh, man... Some seriously NICE STUFF. I am very comfortable dealing with him.

                            Now, I do not usually indulge myself, and post up this type of testimonial, but times are tough, and I don't see why I can't spend a few minutes supporting a fellow forum member, and the company he works for.

                            Bob's deck is Top Shelf too - A work of Art.... I just don't wanna POLISH IT!!!
                            Guess I bit off more than I could chew after having it polished in the first place. Glad I took lots of pics before the road salt left a grime.

                            Comment


                            • #44
                              well i would like to post more pictures but i'm in depate i'm either going to save money(unless some one can get me on a job) and build my own skid (which i have many different drawings for) buy my buddys steel deck from accuform in red deer. Or phone clay up and spend some money and build askid ( i like that idea have wanted to do it for some time) or get a deck built like cornerstones but with a few changes. i dunno but i will be sure to keep you all posted


                              has anyone herd from wicked at all havent seen him in for ever
                              your only as good as # 2 cuz no matter how good you are there is always someone better"
                              2006 DODGE Dualy Quad Cab
                              PIPELINE IS THICKER THAN BLOOD!!!
                              here is all the pictures of my rig www.cardomain.com/ride/2520047/1

                              Comment


                              • #45
                                Originally posted by lynx_welding View Post
                                well i would like to post more pictures but i'm in depate i'm either going to save money(unless some one can get me on a job) and build my own skid (which i have many different drawings for) buy my buddys steel deck from accuform in red deer. Or phone clay up and spend some money and build askid ( i like that idea have wanted to do it for some time) or get a deck built like cornerstones but with a few changes. i dunno but i will be sure to keep you all posted


                                has anyone herd from wicked at all havent seen him in for ever
                                Lynx- check the post, "anyone in Canada heard", he was there a few days ago.

                                Comment

                                Working...
                                X