Announcement

Collapse
No announcement yet.

Cobra Push Pull Guns

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cobra Push Pull Guns

    What type of welders use the Cobra push pull guns? Can they be used on a standard MIG set up such as a MM210?
    Thanks,
    Nick

  • #2
    Hey!
    It depends what you have !
    But They all should work on your machine with the right parts
    look Here
    http://mkproducts.com/support/Manual...or%20Guide.pdf
    Thanks!

    Comment


    • #3
      Cobra Push Pull Guns

      The Cobra push pull gun is used on a Cobramatic cabinet which contains the 'push' half of the system. They also build a one-piece welder that contains the push half and looks a little like the MM252 and will accommodate the Cobra pull gun. Since the Cobramatic gun contains a pull motor, it will not work on any normal mig welder containing a constant speed push motor like the MM210. It is quite a delicate procedure to synchronize the two motor speeds. Although Miller did build an adapter to allow the pull gun to work with a MM251 and use the 251 drive motor as a slave push motor, they are rare and would offer the only prayer of running a pull gun on a normal mig so far as I know. weldersales

      Comment

      Working...
      X