Announcement

Collapse
No announcement yet.

FS: Miller RFC-14 Foot Control

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • StillBoostin
    started a topic FS: Miller RFC-14 Foot Control

    FS: Miller RFC-14 Foot Control

    SOLD

    For sale or trade:

    Miller's RFC-14 Foot Control. This is the super heavy duty version. All metal design for industrial and production applications. Bought it new from a guy who welds for CHIP KING RACING as their weldor/ fabricator. He never used it cause he prefers the finger control. I bought this not knowing how big it was in size. It's pretty heavy compared to other foot controls. I thought it would be smaller. Open to trades. It is the same outer case as the RFC-23A . I did test it and it work fine. If you need a video I guess I could make one somehow. I just cleaned it cause it had a thick layer of dust on it when I got it. 14 pin connector with 5 pins in it. same as the new RFC-14 and RFC-14HD but with a metal cover. Any questions call me, PM me, or email me. I posted this on a few other forums.

    Originally posted by weldersales View Post
    The RFC-14 was the original 14 pin control built in the same metal box as the RFC-23A and using the same size resistor with the sliding brush. The newer, lower, plastic RFCS-14 uses a small 2 watt potentiometer. Both do the same job. weldersales






    James
    stillboostin@comcast.net
    (410) 830-9616
    Last edited by StillBoostin; 07-19-2008, 04:47 PM.

  • gypsywanderin
    replied
    I have one of these! I have been selling off and downsizing some of my old equipment. it is hardly used and i wonder if there is an adaptor or way to rewire and make this a spare for a Miller Maxstar 150 STH?

    Leave a comment:


  • StillBoostin
    replied
    SOLD

    Sold to patf on weldingwebs.com

    James

    Leave a comment:


  • StillBoostin
    replied
    One more pic:



    Owners manual:

    http://www.millerwelds.com/om/o826n_mil.pdf
    Last edited by StillBoostin; 07-14-2008, 09:53 PM.

    Leave a comment:

Working...
X