Announcement

Collapse
No announcement yet.

RFC-14 and RFCS-14

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • RFC-14 and RFCS-14

    Looking at the Miller paper manual on my Highfreq 251-D ,(about 4 years old)it shows that the foot control for the unit is a RFC-14 . What is the difference between this and the RFCS-14? Im guessing that the RFC-14 is a discontinued model.I bought a RFCS-14 for my dynasty and plan to use it sometimes for the 251-D.

    Does rfcs stand for REMOTE FOOT CONTROL SWITCH?
    2- XMT's 350 cc/cv
    1- Blue star 185
    1- BOBCAT 250
    1- TRAILBLAZER 302
    1- MILLER DVI
    1- PASSPORT PLUS
    1- DYNASTY 200 DX
    1- MAXSTAR 150 STL
    1- HF-251 BOX
    1- S-74d
    1- S-75DXA
    2- 12-RC SUITCASES
    1- 8-VS SUITCASE
    2- 30 A SPOOLGUNS

  • #2
    Foot Control

    The RFC-14 was the original 14 pin control built in the same metal box as the RFC-23A and using the same size resistor with the sliding brush. The newer, lower, plastic RFCS-14 uses a small 2 watt potentiometer. Both do the same job. weldersales

    Comment


    • #3
      Originally posted by weldersales View Post
      The RFC-14 was the original 14 pin control built in the same metal box as the RFC-23A and using the same size resistor with the sliding brush. The newer, lower, plastic RFCS-14 uses a small 2 watt potentiometer. Both do the same job. weldersales
      Thank you for the reply; I just got back from airgas,he called miller and was told they are somewhat the same and that the RCFS-14 will work on the
      251-D starting with the serial #JK and newer.
      2- XMT's 350 cc/cv
      1- Blue star 185
      1- BOBCAT 250
      1- TRAILBLAZER 302
      1- MILLER DVI
      1- PASSPORT PLUS
      1- DYNASTY 200 DX
      1- MAXSTAR 150 STL
      1- HF-251 BOX
      1- S-74d
      1- S-75DXA
      2- 12-RC SUITCASES
      1- 8-VS SUITCASE
      2- 30 A SPOOLGUNS

      Comment


      • #4
        I have a new RFC-14(big metal tall box) that I would love to sell you cheap. I bought it thinking it was smaller. Make me an offer and it is yours. Tested it an it does work. I bought a small SSC chrome pedal with blue grip tape top and bottom. Very cool.


        James
        Miller Dynasty 200DX SOLD
        WeldTec Water Cooler SOLD
        Miller Millermatic 180 w/ Spoolmate 100
        20Ton press
        And lots of Cut-off and grinding wheels
        www.IAGPERFORMANCE.com

        Comment

        Working...
        X