Have a spectrum 3080 with no pilot arc or cutting capability. The machine turns on ready light goes on. Pull the trigger and nothing. No lights or anything. Trigger in torch is good air solenoid kicks but does not let air go to torch. Have a hypotherm that does the same thing. Air pressure out of the wall is constant 110 psi. with around 10cfm. Got spectrum to cut once then nothing after that. Checked ground clamp, Torch connections, air input. Manual says replace consumables then try again but don't think thats the problem. Wouldn't there be a cup light coming on or something along those lines? Has anyone ever had this happen to them?
No announcement yet.
Spectrum 3080 is a no go