Announcement

Collapse
No announcement yet.

Maxal 4943 Filler Rod

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Maxal 4943 Filler Rod

    Hi Guy's
    Would anyone have a source for the Maxal 4943 other then Hobart,seems they only sell it in 10 lb. lots, I really don't need that much,any help is appreciated.

    Thanks Dean,

    Happy Holidays to all.
    Miller Dynasty 350
    Lincoln PT 375
    Miller Trailblazer
    Lagun 10x50 Vertical Mill
    Southbend 9x30 Lathe
    Kwik-Way Valve Grinder
    Victor O/A Set
    Delta 10" Vertical Band Saw
    45 Yrs. worth of hand tools & a couple hammers
    Custom Built Cylinder Head Flow Bench 1400 CFM

  • #2
    Originally posted by Engine Builder View Post
    Hi Guy's
    Would anyone have a source for the Maxal 4943 other then Hobart,seems they only sell it in 10 lb. lots, I really don't need that much,any help is appreciated.

    Thanks Dean,

    Happy Holidays to all.
    Have you checked for local stocking dealers??

    http://www.hobartbrothers.com/where-to-buy.html

    and checked this thread??

    http://www.millerwelds.com/resources...Casting-repair
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      Thank you,

      I did not see the where to buy tab.
      Miller Dynasty 350
      Lincoln PT 375
      Miller Trailblazer
      Lagun 10x50 Vertical Mill
      Southbend 9x30 Lathe
      Kwik-Way Valve Grinder
      Victor O/A Set
      Delta 10" Vertical Band Saw
      45 Yrs. worth of hand tools & a couple hammers
      Custom Built Cylinder Head Flow Bench 1400 CFM

      Comment


      • #4
        Originally posted by Engine Builder View Post
        Thank you,

        I did not see the where to buy tab.
        Welcome aboard..!!!

        You are about 180 miles south of us...
        .

        *******************************************
        The more you know, The better you know, How little you know

        “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

        Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

        My Blue Stuff:
        Dynasty 350DX Tigrunner
        Dynasty 200DX
        Millermatic 350P w/25ft Alumapro & 30A
        Millermatic 200

        TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

        Comment


        • #5
          Originally posted by H80N View Post
          Welcome aboard..!!!

          You are about 180 miles south of us...
          Hi,
          Where are you located? And i have another question how do i list my equipment on the bottom of a post so it stays there?

          Dean
          Miller Dynasty 350
          Lincoln PT 375
          Miller Trailblazer
          Lagun 10x50 Vertical Mill
          Southbend 9x30 Lathe
          Kwik-Way Valve Grinder
          Victor O/A Set
          Delta 10" Vertical Band Saw
          45 Yrs. worth of hand tools & a couple hammers
          Custom Built Cylinder Head Flow Bench 1400 CFM

          Comment


          • #6
            Sent you a PM...
            .

            *******************************************
            The more you know, The better you know, How little you know

            “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

            Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

            My Blue Stuff:
            Dynasty 350DX Tigrunner
            Dynasty 200DX
            Millermatic 350P w/25ft Alumapro & 30A
            Millermatic 200

            TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

            Comment


            • #7
              Well,I got some of this,and it really welds nice.
              Miller Dynasty 350
              Lincoln PT 375
              Miller Trailblazer
              Lagun 10x50 Vertical Mill
              Southbend 9x30 Lathe
              Kwik-Way Valve Grinder
              Victor O/A Set
              Delta 10" Vertical Band Saw
              45 Yrs. worth of hand tools & a couple hammers
              Custom Built Cylinder Head Flow Bench 1400 CFM

              Comment


              • #8
                Originally posted by Engine Builder:315619
                Well,I got some of this,and it really welds nice.
                Lets see some pics!

                Comment


                • #9
                  1 cyl Honda busted case

                  Originally posted by Gingerboy View Post
                  Lets see some pics!
                  Below is thread boss with 4943 filler welded back to broken lower case
                  section. The break was first tacked, then gouged with carbide burr
                  prior to welding out.
                  These disposable Honda small engines are much lower quality casting
                  (porosity, recycle AL, internally dirty) than the vehicle heads and blocks.
                  Name:  3721c1e79f260242a4a9e2845af9e642.jpg
Views: 1
Size:  153.2 KB

                  Comment

                  Working...
                  X