Announcement

Collapse
No announcement yet.

Construction of a Light Aircraft

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Construction of a Light Aircraft

    Here is an instructional film of the construction of a Piper J3 Cub during WWII...

    Part of it illustrates the fixturing and welding of the Chrome Moly tube fuselage..
    the same techniques would apply to a sports racing car chassis... with some adaptation to the TIG welding process.... as opposed to oxy-fuel...

    http://www.youtube.com/watch?feature...&v=Q6q1VKsTeKQ

    It is instructive to see how effectively things were done some 70 years ago... before hi-tech

    This link had been posted on SFT... credit where due and kudos to diggerdoug..
    Last edited by H80N; 06-05-2012, 04:10 PM.
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

  • #2
    Dynasty 200DX Aircraft Fuselage Welding...

    What a difference 70 years makes.... here is a Bearhawk 4130 tube fuselage TIG welded with a Dynasty...

    http://www.youtube.com/watch?v=guZCK_0BMqo

    this is fairly short but very informative on tube welding technique..... the rest of his videos worth watching as well.....
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      Great videos. As a former pilot, I always enjoy instructional videos that include welding and aircraft.
      Lincoln Vantage 400
      Trailblazer® 302 Air Pak™

      Miller Dynasty® 350
      Millermatic 350P Aluminum
      Millermatic® 252
      Syncrowave 351
      Lincoln LN-25 Pro

      Multimatic™ 200

      XR-Aluma Pro Gun
      Diversion™ 180

      Spectrum® 625 X-TREME™

      Thermal Dynamics® Cutmaster® 52
      Victor Oxy/Acetylene Set

      Comment


      • #4
        Early Days of seeing Piper J3 and other chromemoy framed aircraft repairs..

        quote from above: "It is instructive to see how effectively things were done some 70 years ago... before hi-tech"

        and the skills of those doing the work that were not so obvious to the bystander..

        I had an older brother who started working at a local small airport in exchange for flying time.. He was flying at the age of 14 and went on to become a Navy carrier pilot flying the F8 Crusader.

        A fringe benefit to me as a young kid was a free run of the place (times were different back then) and I learned alot just from visual observation of engines and aircraft in various states of disassembly and the bone yard out back of one of the hangers of a few aircraft that had crashed or were scrapped out.

        This strip was run by an FAA certified A&E mechanic who rebuilt engines, did major repairs to aircraft and that of course got into O/A gas welding of the chromemoly tube frames that a number of aircraft including the Piper J3 were constructed of.

        Pieces of chromemoly were cut out of the boneyard scrapped airframes on occasion to make repairs to other aircraft.. Of course it was only in later years I myself learned of the care that must be taken, and post heat treating of chromemoly after the gas welding..

        I've have a few photographs from this era and documented some of the memories in this link.. http://home.4x4wire.com/deddleman/se...navy_days.html
        Hobby Welder for about 32 years
        Hobart 190 MIG with SpoolGun
        Hobart AirForce 700i Plasma Cutter
        Hornell Speedglas 9000X Helmet
        295A AC Buzzbox (what I learned on)
        Miller Bobcat 225, factory propane option, also serves as my emergency power generator
        Dandeman's Toy Page

        Comment


        • #5
          I am not aware of the need to heat treat after gas welding. Can you expound on that statement?

          "I myself learned of the care that must be taken, and post heat treating of chromemoly after the gas welding.."

          http://home.4x4wire.com/deddleman/se...navy_days.html[/QUOTE]


          Jerry Jackson
          San Antonio

          Comment


          • #6
            With what looks like the beginings of a good discussion of oxy-fuel over on the welding forum...

            I thought this thread might need a bounce....

            http://www.millerwelds.com/resources...Equipment-line

            Oxy-Fuel is a versatile method that will always be around...

            Heck... if we see one of those doomsday scenarios where tech is destroyed and shield gasses like argon & helium become unobtanium...non-players... electronics is inop or EMP'd

            We will still be able to decompose water and weld using Oxy-Hydrogen.... and do a darned respectable job of it in many areas...
            Last edited by H80N; 08-11-2013, 07:32 AM.
            .

            *******************************************
            The more you know, The better you know, How little you know

            “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

            Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

            My Blue Stuff:
            Dynasty 350DX Tigrunner
            Dynasty 200DX
            Millermatic 350P w/25ft Alumapro & 30A
            Millermatic 200

            TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

            Comment

            Working...
            X