Announcement

Collapse
No announcement yet.

snowmobile clutch guard for a drag sled

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • snowmobile clutch guard for a drag sled

    Here is a clutch guard I made for a drag sled. Its 3 pieces. outer guard, easily removable, inner guard fastened to chassis, and belly guard, riveted in. It was a pain because of clearance issues. Also first time welding alum with an inverter. Think I'll stick w/ transformer welders for aluminum.Name:  042faa15f8973aede01dc6554e501fae.jpg
Views: 1
Size:  56.1 KBName:  7baab5958c91384f0f1a00423216a4a9.jpg
Views: 1
Size:  60.8 KB

  • #2
    Nice work
    With that kind of talent you need to keep up with the newer technology and you will see, after a bit, your work will improve with the inverter's tune-ability.
    But you won't find them instantly awesome when you are already good with a transformer machine. It took me a bit.

    www.facebook.com/outbackaluminumwelding
    Miller Dynasty 700...OH YEA BABY!!
    MM 350P...PULSE SPRAYIN' MONSTER
    Miller Dynasty 280 with AC independent expansion card
    Miller Dynasty 200 DX "Blue Lightning"

    Miller Bobcat 225 NT (what I began my present Biz with!)
    Miller 30-A Spoolgun
    Miller WC-115-A
    Miller Spectrum 300
    Miller 225 Thunderbolt (my first machine bought new 1980)
    Miller Digital Elite Titanium 9400

    Comment


    • #3
      Thanks..Just seems to me w/ higher end transformer machines, you get the best of both worlds. Maybe I'll change.

      Comment


      • #4
        With higher end INVERTERS you get the best in THE world
        Cheap inverters.....I can't really say, altho my 200 welds really nice compared to my 700. But then we are talking Miller here not chinese.

        www.facebook.com/outbackaluminumwelding
        Miller Dynasty 700...OH YEA BABY!!
        MM 350P...PULSE SPRAYIN' MONSTER
        Miller Dynasty 280 with AC independent expansion card
        Miller Dynasty 200 DX "Blue Lightning"

        Miller Bobcat 225 NT (what I began my present Biz with!)
        Miller 30-A Spoolgun
        Miller WC-115-A
        Miller Spectrum 300
        Miller 225 Thunderbolt (my first machine bought new 1980)
        Miller Digital Elite Titanium 9400

        Comment


        • #5
          Thanks for the input. Yeah I keep the green welder in the corner under a cover when not in use. If it was a 200dx I'd probably have it in the middle of the floor with a light shining on it. By the way have to do a couple mods to this pos today. Lots of revisions so far.

          Comment


          • #6
            cool.....keep the pics rolling

            www.facebook.com/outbackaluminumwelding
            Miller Dynasty 700...OH YEA BABY!!
            MM 350P...PULSE SPRAYIN' MONSTER
            Miller Dynasty 280 with AC independent expansion card
            Miller Dynasty 200 DX "Blue Lightning"

            Miller Bobcat 225 NT (what I began my present Biz with!)
            Miller 30-A Spoolgun
            Miller WC-115-A
            Miller Spectrum 300
            Miller 225 Thunderbolt (my first machine bought new 1980)
            Miller Digital Elite Titanium 9400

            Comment


            • #7
              Nice work there on your Cat turbo drag sled.
              Does your racing sanction require a fully enclosed clutch guard?
              Lincoln Idealarc 250 stick/tig Miller Bluestar 2E Thermal Arc Hefty 2 feeder Thermal Dynamics Cutmaster 52 Torchmate CNC table Ironworker Welder Operating engineer Owner/Operator Devlin Metal Works Custom CNC Plasma Cutting and Welding

              Comment

              Working...
              X