Announcement

Collapse
No announcement yet.

Tig suggestions

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tig suggestions

    I am in the market for a Tig machine for my home shop. It will be used primarily for automotive use. I have done some research and have decided on Diversion 180 or Syncrowave 250DX would love a dynasty but dont think i can quite afford it. and the syncrowave seems to be able to handle thicker steel. Pros and cons on each machine would be nice. Portability is not that important, and i have an old lincoln buzz box for an arc welder but like the idea of having a machine with both.

    any help would be greatly appriciated.

  • #2
    I don't understand the reasoning.

    You're comparing a basic, entry level inverter to an industrial grade transformer machine. No question in my book. The Syncrowave wins.

    But, while on the subject, if you're looking at the Syncrowave 250 (and not the Sync 200) I think you'll find that the Sync 250 and the Dynasty 200 cost almost exactly the same.

    If you don't need the extra amps the Sync 250 provides, the Dynasty 200 is a difficult machine to beat for overall performance. By the time you add the pulser option (about $100/owner installed) to the Sync 250, you're right at the price of a Dynasty 200 DX.
    Syncrowave 250 DX Tigrunner
    Dynasty 200 DX
    Miller XMT 304 w/714D Feeder & Optima Control
    Miller MM 251 w/Q300 & 30A SG
    Hobart HH187
    Dialarc 250 AC/DC
    Hypertherm PM 600 & 1250
    Wilton 7"x12" bandsaw
    PC Dry Cut Saw, Dewalt Chop Saw
    Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
    Thermco and Smith (2) Gas Mixers
    More grinders than hands

    Comment


    • #3
      id look for a pre dx syncrowave 250

      Comment


      • #4
        Its all in what your looking to spend, is portability a big issue for you? If so Id look into the Dynasty series.

        Comment

        Working...
        X