Announcement

Collapse
No announcement yet.

Hanging Metal Panels

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hanging Metal Panels

    I MOVED THIS POST TO "PROJECTS"



    Hi All,
    We are doing a custom job for a resturant and need to hang 5 panels which will overlap each other by about 1'. It's more of an artistic piece then functional. I attached a .pdf 2D drawing. I am having a dilemma on deciding the gauge (20GA...to much weight>). of cold rolled I want to use as they will be sprayed with automotive paint.

    The plan was to mount them to a 1" x 1/2" sub-frame because they need to remain as low-profile as possible. I would put an "L" bend at the top of each to rest on one of the crossbars in the sub-frame. Any idea on this would be appreciated.
    Attached Files
    Last edited by ChrisV; 10-23-2008, 12:26 PM.
    Chris
    87' Mustang GT - Blown 306 Road Racer
    Millermatic 210
    Spectrum 375
    chris@ckvalentidesigns.com
    www.ckvalentidesigns.com

  • #2
    I would just tack to the edge of the 1 x 1/2 frame. Fast and simple but I might not be seeing all of your issues you might have.
    Laurence

    Comment

    Working...
    X