If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
80% of failures are from 20% of causes Never compromise your principles today in the name of furthering them in the future. "All I ever wanted was an honest week's pay for an honest day's work." -Sgt. Bilko "We are generally better persuaded by reasons we discover ourselves than by those given to us by others." -Pascal "Since we cannot know all that there is to be known about anything, we ought to know a little about everything." -Pascal
All you need is a metal lathe and some time
well thats simple enough.
seems like a tube with a plug center drilled would be the simplest / easy-est way if you don't have a lath. you could always drill the side of the tube to weld the plug in place threw the side. just get some tube and solid stock that fits tight, cut to fit.
thanks for the help
hope i helped
feel free to shoot me an e-mail direct i have time to chat. email@example.com summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
had some fenders that had disconecting flaris that looked like that. it was a tube with a washer fit snug then tack welded on one side. used it so a bolt could join it then had plastic caps so you couldnt see