Announcement

Collapse
No announcement yet.

mm35

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • mm35

    A friend of mine has found a mm35 for sale, it was used in a body shop,has overspray ect,but seems to be in fair shape. Are parts still avaliable and what would be a fair asking price? I believe they want $350 for it. Also Does any one have any basic info on that machine. Tapped settings, amperage output ect. Thanks for the replies. chub

  • #2
    Look here for your manual.
    http://www.millerwelds.com/service/ownersmanuals.php
    Type in MILLERMATIC 35 and your manual will be there. I had a few of those MM35's and they are the grand daddy of all the modern migs we all enjoy...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      if you can get a MM35 working for $350, get it.
      over spray is just cosmetic. i certainly can think of anything even close to as nice for that price. if i had the $$ i would jump on one for that price.
      cant remember if its the for runner of the MM210 or MM251, i think the 210 but dont hold me to that.
      thanks for the help
      ......or..........
      hope i helped
      sigpic
      feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
      summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
      JAMES

      Comment


      • #4
        Here is some MM35 history.
        http://www.millerwelds.com/about/1971.html

        The MM185 grew into the MM210. The MM35 was just the first affordable mig. We bought a few of them in the mid 1970's at the time all other migs were big industrial size jobs...Bob
        Bob Wright

        Spool Gun conversion. How To Do It. Below.
        http://www.millerwelds.com/resources...php?albumid=48

        Comment


        • #5
          Just wandering where to find the serial number on the mm35?

          Comment


          • #6
            Chub,

            The serial number should be on the front of the unit. The older ones were stamped right into the nameplate.

            Kevin
            Kevin Schuh
            Service Technician
            Miller Electric Mfg. Co.

            Comment


            • #7
              Mm35

              350 is a steal for the MM35. This is the first one-piece mig at a very low price. To keep price down, Miller just ran the drive motor off the welding output through a rheostat resulting in no feedback to sense speed of wire feed. Also, there was no solenoid in the very first models, just a pinched gas hose in the gun. The next model, MM200, had gas solenoid and scr controlled wire feed speed using the same board found in their expensive top of the line feeders. We have many of both these machines running today in our area. weldersales

              Comment


              • #8
                I believe if you find a black faced MM-35 you got the deal of the year.

                Weldersales seems to know his stuff.

                Comment


                • #9
                  Originally posted by chub380 View Post
                  A friend of mine has found a mm35 for sale, it was used in a body shop,has overspray ect,but seems to be in fair shape. Are parts still avaliable and what would be a fair asking price? I believe they want $350 for it. Also Does any one have any basic info on that machine. Tapped settings, amperage output ect. Thanks for the replies. chub

                  If you found a 35, it will deliver 200 amps at a 20% duty cycle. It's rated for 150% at 23VDC and 60% duty cycle. It is tapped, but you select the voltage by plugging the selector cord into the socket you want, rather than having a switch.

                  I found one in a body shop, too. Covered with spray dust, snading dust, coffee cup stains, and all that. I asked the owner if they ever used it. He said "all the time!". He let me try it out. It is a very nice running machine. If it had been for sale, I'd have paid $350 for it twice.

                  Hank
                  ...from the Gadget Garage
                  Millermatic 210 w/3035, BWE
                  Handler 210 w/DP3035
                  TA185TSW
                  Victor O/A "J" series, SuperRange

                  Comment


                  • #10
                    MM35's are workhorse machines. There is little that can fail in these units.
                    350 is an outright steal for this machine. People often as as much as 1000 bucks for these machines. I consider 5-700 to be a good deal for these units. I wouldn't suggest anyone hesitate for 350.

                    With .035 wire one can easily work exhaust tube up to 5/8 plate.

                    my .02

                    just finished returning 3 MM35 machines to working order.. save the old machines!!

                    Comment


                    • #11
                      Does anyone know what the difference is between a black faced unit and the standard one? Also how can you tell where the gas shutoff is? Thanks chub

                      Comment


                      • #12
                        mm35s

                        The company my wife works for was having an equipment auction.I just bought a working 35s for $150 2 days ago,is this the same as what you guys are refering to here.I don't mean to sound dumb,I just don't know much about machines this old.

                        Comment


                        • #13
                          I'm still using a 1973 MM35 and it's still working great. Mine has a gas solenoid so I'm assuming it's a second generation machine. Mine has the white face and also has a spot panel installed in it. Mine came out of an old Maaco body shop covered in overspray and spilled coffee stains. I got mine for free as the previous owner was hoodwinked into buying a new machine and was under the assumption that the welder wasn't worth fixing. It has a brand new Tweco Mini-MIG gun on it which only needed a new liner, nozzle mount, nozzle and contact tube. I put about 20.00 into it and it welds like a champ. I haven't even plugged in the red mess that I paid nearly 700.00 for since acquiring the MM35. If you can pick up a working one for 350.00 I'd certainly do it as I wouldn't take 350.00 for mine.
                          Blondie (Owner C & S Automotive)

                          Colt the original point & click interface!

                          Millermatic 35 with spot panel
                          Miller 340A/BP
                          Victor O/A torches
                          Lincoln SP125
                          Too many other tools to list

                          03 Ram 1500
                          78 GS1000
                          82 GL1100 Interstate

                          Comment


                          • #14
                            Here's a pic of the one I scored for $150.00. I think I got lucky on this one. Bill
                            Attached Files

                            Comment


                            • #15
                              I think mine might be a little more stained but about the same overall shape. I'm hoping someday to have time to repaint it and see if I can find the period correct decals and paint code for it. Yeah you got a good deal at 150.00!!!
                              Blondie (Owner C & S Automotive)

                              Colt the original point & click interface!

                              Millermatic 35 with spot panel
                              Miller 340A/BP
                              Victor O/A torches
                              Lincoln SP125
                              Too many other tools to list

                              03 Ram 1500
                              78 GS1000
                              82 GL1100 Interstate

                              Comment

                              Working...
                              X